Samsung WA40J3000AW Service Manual page 15

Part
Top Cover/ Door
Switch
Sensor Pressure
Switch
figure Description
1. Remove the 2 screws from the cover
plate.
2. Separate the control panel assembly.
3. Separate the water valve, the pressure
switch and the filter EMI housing.
Separate the housing to prevent
stress and damage to the wire-
harness.
4. Separate the main wire harness, the
pressure switch hose clip , Grounding
screw .
5. Separate the top cover assembly by
lifting and pushing ahead the top part of
the assembly.
6. Remove the 2 screws and separate 2
WIRE VINYL.
1. Disassemble the control panel assembly.
2. Separate the pressure switch housing.
3. Before separating the hose, release the
clip.
When releasing the clip, take care
that you do not tear the hose.
Disassembly and Reassembly _ 13