Vet Innovations PortionPro Rx Quick Start Manual

PortionPro Rx
You are programming ("assigning") this feeder for one dog or cat.
1
Start Here
2
Move Tag(s)
Place tag(s) at least 3 ft (90 cm) away from feeder.*
At least 3 feet
*
Each pet in your home should receive a
PortionPro Rx collar tag.
3
Insert Power Cord
Insert round end into underside of feeder base as
shown; plug other end into wall outlet.
4
Insert Bowl
To Program Feeder
Use or to scroll through options.
Press to confirm choice.
Hold 2 seconds to go back one step.
Quick Start Guide
™
Select Location
Near outlet, against wall,
bowl facing out.
Set Current
5
Time
Press or to choose
AM or PM. Press to
confirm choice. Repeat
to set hours and minutes.
6
Select Dog or Cat
Choose dog or cat
icon, then confirm.
7
Select Meals Per Day
For a cat, choose 2,
4, or 6 meals.
For a dog, choose 2
or 3 meals.
8
Set Meal Times
2 or 4 meals: set
time for each meal.
6 meals: set time of
first meal.*
2 or 3 meals: set
times for each meal.
*
All remaining meals will be spread equally over 24 hours.