Advertisement
E. Daily Maintenance & Periodic Inspection
1. Check daily the wire rope, pulley, roller, front and rear truckles and other structure parts for
wearing, casting, and deformation.
2. Once each three months for a check of lubricating-wearing for ratchet wheel structure and
parts.
3. Once each three months for an oiling and greasing of ratchet structure, gear structure and
handle structure.
4. Check and ensure all connecting bolts are fast and fixed.
F. Trouble Shooting
SN
Item
1
No elevation for platform
or fork (accessory)
2
Platform or fork (acc.)
Slipping after raised
3
Platform or fork (acc.)
idle for descending or
descending unevenly
Cause
1. Wire fall-off
2. Wire flossing in disk
3. Other particle lock
1. Ratchet structure
Damage
2. Copper friction
washer wearing-off
1. Ratchet structure
damage
2. Other particle lock
Treatment
Check adjusting, connect fast
Re-tidying
Clear away
Check, turn-over
Check, adjust, turn-over
Check, turn-over
Clear away
Advertisement
