Table of Contents
Advertisement
Quick Links
S 500
Digital Lever Lock
User Manual / Installation Guide
SK500 Series
SPECIFICATIONS
Dimensions (Panels with levers):
5 3/16" (H) x 5 1/2" (W) x 2 3/4" (D)
Total Weight: 3.31lbs
Door Thickness: 1 3/16" — 2"
Adjustable Stainless Steel Latch
Power Supply:
4AA Alkaline Batteries (included)
Digital Keypad
Temperature: -40°F — 185°F
Thank you for choosing the Delaney SK500 Digital Lever Lock.
Please keep this manual for future reference.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Delaney SK500 Series
Summary of Contents for Delaney SK500 Series
- Page 1 Total Weight: 3.31lbs Door Thickness: 1 3/16” — 2” Adjustable Stainless Steel Latch Power Supply: 4AA Alkaline Batteries (included) Digital Keypad Temperature: -40°F — 185°F Thank you for choosing the Delaney SK500 Digital Lever Lock. Please keep this manual for future reference.
- Page 2 SK500 USER INSTRUCTIONS SK500 INSTALLATION EXTERIOR VIEW The SK500 can be programmed to remain locked at all times, requiring a If door is not bored, use the Master Code each time access to the door is required. It can also be attached template on the back of programmed to remain unlocked at all times, allowing open access until the the this manual.
- Page 3 SK500 USER INSTRUCTIONS The SK500 can be programmed to remain locked at all times or it can be programmed to remain unlocked (passage mode) as needed. The Operation Success 1 Beep interior lever is always open allowing free exit. Enter/Exit Set Up Mode 2 Beeps Operation Failure 3 Beeps UNLOCKING Low Battery 5 Beeps ← Replace all Batteries ① This lock allows one (1) Master code, nine (9) Sub codes and one (1) Temporary code. These are user programmed codes (see ③ PROGRAMMABLE USER CODES My Codes through ⑤) Master Code Sub Code 1 ② Each lock comes with an access emergency key. Simply remove Sub Code 2 keyhole cover and unlock door. Sub Code 3 Sub Code 4 PROGRAMMING Sub Code 5 ③ USER MASTER CODE SET UP Sub Code 6 1) Press reset button twice to enter set up mode. Sub Code 7 2) Input factory default master code (111111) and press # key Sub Code 8 3) After single beep, enter 00 Sub Code 9 4) Enter new User Master code (4‐6 Digits) and press # key to confirm Temp Code 10 5) Press # key again to exit...
Need help?
Do you have a question about the SK500 Series and is the answer not in the manual?
Questions and answers