Zman ZSC-900-BLK Instruction Manual

Zman Refrigerator Smart Control Part #: ZSC-900-BLK
Memory backup - Electrical ratings: 120V 15 Amp
Installation:
Plug the Smart Control into the outlet behind the refrigerator and plug the refrigerator into the receiving end of the cord.
The LED display is extended and mounted to the front or side of the refrigerator in a clearly visible location.
For a more secure installation see photos below:
Mount Device to Wall
Plug Refrigerator into Device
Settings:
When the Zman Refrigerator Smart Control starts up for the first time, the indicator lights and text on the display
will flash. This flashing warns the user that the device needs setup.
Setting Time & Time Zone

Press the SET button once to power up the screen and once more to enter the main menu. The clock icon will be
displayed.

Press SET again to enter the Time menu. The hour will be highlighted

Press the up/down arrows to select the hour and press the SET button to confirm the setting.

The minute will now be highlighted..

Use the arrows to scroll to the correct minute, and press SET.

The screen will now display the time zones.

Use the arrows to scroll to your applicable time zone and press SET.
Setting the date
:
After the time is set press the up arrow to enter the Date menu.

Press SET again to set the date

The year will be selected, press the up/down arrows to select the year. Press the SET button to confirm the selection
and move on to the next item.
Plug Device into Outlet
:
INSTRUCTION MANUAL
Mount Indicator to
Refrigerator
Note: Until the Smart control has been
set with time date location and cycle
setting, the refrigerator will remain
powered on as normal without
activating Shabbos/Yom tov
Operation.