Table of Contents
Advertisement
Customizing Your VAIO Computer >
Setting the Password
Adding the Power-on Password
The power-on password is provided to protect your computer from unauthorized access.
!
Once you have set the power-on password, you cannot start your computer without entering the password. Be sure not to forget the password. Write
down your password and keep it safe and private from other people.
If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in
for service to reset the password.
To add the power-on password
1
Turn on the computer.
2
Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
3
Enter key.
4
On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
5
At the confirmation prompt, press the Enter key.
✍
The following is to configure your computer to prompt password entry when you turn it on or display the BIOS setup screen.
6
Select Password when Power On under Security and press the Enter key.
7
Change the setting from Disabled to Enabled.
8
Press the < or , key to select Exit, select Exit (Save Changes) or Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
n
66
N
Advertisement
Table of Contents
