Advertisement

User Guide
Guía del usuario
Guide d'utilisation
Guida per l'uso
Benutzerhandbuch
Appendix
English ( 3 – 15 )
Español ( 16 – 29 )
Français ( 30 – 44 )
Italiano ( 45 – 58 )
Deutsch ( 59 – 72 )
English ( 73 – 74 )

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PMD-526C and is the answer not in the manual?

Questions and answers

Summary of Contents for Marantz professional PMD-526C

  • Page 1 User Guide English ( 3 – 15 ) Guía del usuario Español ( 16 – 29 ) Guide d’utilisation Français ( 30 – 44 ) Guida per l’uso Italiano ( 45 – 58 ) Benutzerhandbuch Deutsch ( 59 – 72 ) Appendix English ( 73 –...
  • Page 3: Safety Instructions

    User Guide (English) Introduction Box Contents Support PMD-526C (2) Rack Ears For the latest information about this product (documentation, technical specifications, system Power Cable (6) Rackmount Screws requirements, compatibility information, etc.) and Remote Control User Guide product registration, visit marantzpro.com.
  • Page 4: Front Panel

    After the devices have been cleared from the unit’s memory, to connect again to the same device, go to your Bluetooth device and select “Unpair” or “Forget the Device”, depending on the type of device that you have. You can then select PMD-526C from your list of Bluetooth devices and connect.
  • Page 5 Display Media Type: This is the currently selected media: CD, AUX, USB, SD or Bluetooth. See Operation > Selecting Media Playback Mode for more information. Playback Operation Icon: This shows various symbols to indicate the current playback status: Playing Rewinding Paused Fast-Forwarding Stopped...
  • Page 6: Rear Panel

    4. Bluetooth Receiver: This is the built-in antenna used to receive a signal from a Bluetooth device. 5. Remote Input: This input lets you connect a host device (usually a computer) to PMD-526C. You can use the host device to control PMD-526C via commands sent from it (using RS-232C serial communication).
  • Page 7 USB, or SD track. Random: Press to cycle through Random Play Mode or Single Play Mode () in CD, USB, or SD mode. PMD-526C Display: Press and release the button to adjust the display brightness. Press and hold the button to open the options menu.
  • Page 8 Battery Usage Important: Before using the remote control for the first time, pull the insulation sheet out from the battery compartment. To replace the battery: 1. On the back of the remote control, put a DOOR RELEASE paperclip into the door release hole and DOOR RELEASE DOOR RELEASE then slide the door release open.
  • Page 9 Important: Please see Other Information > CDs to learn more about the types of CDs the PMD-526C supports and for more information about CD handling and care. When powering on the unit, hold the Eject button to engage Force Eject Mode.
  • Page 10 Playing MP3 Files on a CD To play MP3 files on a CD: 1. If the unit is off, press the Power button to power it on. Important: Do not insert a CD when the power is off. Doing so may damage the unit. When powering on the unit, hold the Eject button to engage Force Eject Mode.
  • Page 11 Bluetooth device and select “Unpair” or “Forget the Device”, depending on the type of device that you have. You can then select PMD-526C from your list of...
  • Page 12: Additional Functions

    Playing Audio from a SD Card To play audio files on a SD Card: 1. If the unit is off, press the Power button to power it on. 2. Insert the SD card into the SD card slot. 3. Select SD as your desired media type (described in Selecting the Media Playback Mode). 4.
  • Page 13: Other Information

    When playing audio files on a USB device, note the following: • PMD-526C does not charge any connected USB device and does not support USB hubs or USB extension cables. • PMD-526C supports USB devices that are mass storage class or compatible with MTP.
  • Page 14: Troubleshooting

    Troubleshooting If you encounter a problem, do the following: • Make sure all cables, devices, antennae, and/or media are properly and securely connected. • Make sure you are using the unit as described in this User Guide. • Make sure your other devices or media are working properly. •...
  • Page 15 Problem Solution Please see: No Device appears even Disconnect and reconnect the USB device Other Information > USB to make sure it is securely inserted. when a USB device is Devices inserted. Make sure the USB device is of a mass storage class or compatible with MTP.
  • Page 16 Appendix (English) Technical Specifications Digital Audio System Media player System Compatible Media CD, AUX, USB device (mass storage class), SD card, Bluetooth audio Supported Device Formats, CD: CD-DA, CD-ROM (ISO9660) File Systems USB: FAT16, FAT32 SD: FAT16, FAT32 Supported File Formats MP3: Sample rate: 44.1 kHz Bit rate: 32 kbps to 320 kbps and VBR (in CD, USB, or SD Mode)
  • Page 17 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Marantz Professional is under license. SD and SDHC are registered trademarks of SD-3C, LLC.
  • Page 19 marantzpro.com Manual Version 1.2...

Table of Contents