Inserting An Expresscard Module - Sony VAIO VGN-CS100 Series User Manual

Inserting an ExpressCard Module

!
Your computer is supplied with a slot protector in the ExpressCard slot. Remove the slot protector before you use the slot.
Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.
✍
You do not need to shut down your computer before inserting or removing the ExpressCard module.
To insert an ExpressCard module
1 Locate the ExpressCard slot.
2 Push the ExpressCard slot protector so that the protector pops out.
3 Gently take hold of the ExpressCard slot protector and pull it out of the slot.
4 Hold the ExpressCard module with the arrow facing upward and pointing toward the slot.
5 Carefully slide the ExpressCard module into the slot until it clicks into place.
Do not force it into the slot.
!
Insert the ExpressCard slot protector to block any particles from entering the slot when not using an ExpressCard module. Before moving your
computer, be sure to insert the ExpressCard slot protector into the slot.
n 51 N
Using Your VAIO Computer