Wattstemp 860 Manual

Advanced installer's parameters menu
GB
Wattstemp 850 and 860 Flush mounting thermostat series
External sensor
NTC type 10k Ω
at 25°C (ß = 3950)

How to accede it

Press 10 sec on the
key
OK /Edit
OK
/Edit
In order to enter in the menu, press on the escape key during 10 seconds, the following display with the first
parameter must be appears:
- Once you entered in the menu, go to the parameter which you can change by using the keys (◄) or (►).
- Use the keys (+) or (-) to modify and confirm by pushing the (OK) key.
- To leave the parameter menu, go to the parameter "End" and press the (OK) key.
Note:
You could reload one parameter to the default value if you press the escape key when the parameter value blinks.