Usb Devices; Adding A Print Server - ActionTec WNS100 User Manual

Actiontec Wireless Network Attached Storage Device User Manual

USB Devices

A hard drive or
USB
Device's
NAS USB
and stays on, the
USB
For a hard drive, the Device can recognize the
USB
Removing a USB device - Method A (USB Hard Drive)
1. Press the "
USB
2. Wait for the
USB LED
3. Remove the
USB
Removing a USB device - Method B (USB Flash Drive)
1. Click the Flash Utility icon in the computer desktop's system tray.
2. Select Safely Remove Drive.
3. Select the desired
4. Click Eject.
5. Wait for the
USB LED
message when it is safe to physically detach the
6. Remove the
USB
☞
Note: If the
nected. The USB device must be removed and re-inserted to re-
connect.

Adding a Print Server

If a printer is connected to the
USB
server. To do this, follow these instructions (this installation is for Windows
; other operating systems may have a slightly different procedure):
only
1. Plug a
printer in the
USB
Memory Disk (flash memory disk) can be inserted in the
USB
port at any time. Once the
device is available for use.
Eject" button on the rear panel. The
to start blinking slowly.
device.
Device.
NAS
to start blinking slowly. (The program will also display a
device.
device is not removed, it will not be re-con-
USB
NAS
port on the rear panel of the
USB
on the front panel comes on
USB LED
and
FAT
NAS
device.)
USB
Device, the Device can be used as a print
10
file formats.
NTFS
Device beeps.
XP
Device.
NAS