Advertisement
Quick Links
Advertisement
Summary of Contents for Pentashot FLP 15
- Page 1 FLP 15 Laser Simulator OPERATING INSTRUCTIONS...
- Page 3 Complete solution PREFACE Before using the laser simulator, study the manual carefully. The manual must be considered an inseparable part of the product. For this reason, store it for future use. The illustrations used in this manual may not correspond to the actual product. They are used solely to describe the main principles of the equipment and its settings.
- Page 4 It is intended for laser beam shooting initiated by a trigger. The FLP 15 laser simulator employs the FLPM20 laser module with a 15.6 ms code as an emitter. The code is fully compatible with the International Modern Pentathlon Union (UIPM) standards.
- Page 5 830 g (with 2 pcs weight á 40g) Recommended shooting distance up to 10 m LASER Laser module type PENTASHOT FLPM20 Laser class (in accordance with EN 60825 - 1:2014 standard) Wavelength 650 nm Laser beam diameter 4 mm ±5% / 10 m...
-
Page 6: Switching On/Off
Complete solution SWITCHING ON/OFF SWITCHING ON Attach the chip (8) to the simulator body and move it from right to left. This will switch simulator ON and the LED (9) will flash. The number of flashes indicates the battery status: •... - Page 7 Complete solution SETTINGS The user can only set or maintain the following: • set the simulator sights (the laser dot) • set the trigger position, weight and travel • set the grip angle • change the battery • change the simulator stock It is forbidden to open or modify the laser simulator, with the exception of changing the battery or grip.
- Page 8 Complete solution SETTING THE TRIGGER POSITION After loosening the screw (A) you can change the position of the trigger forward or backward. After loosening the screws (B) you can change the position of the trigger upwards or downwards. SETTING THE TRIGGER WEIGHT AND TRAVEL Second stage weight The second stage weight is already exactly adjusted by the manufacturer and it is not recommended to change it.
- Page 9 Complete solution First stage travel Turning the screw (14) clockwise reduce the first stage travel. Turning the screw counterclockwise (14) increases the first stage travel. SETTING THE GRIP ANGLE Use the supplied hexagonal key to loosen the small screw on the simulator grip bottom. Set a new position of the grip and fix it by tightening the small screw.
- Page 10 Complete solution BATERRY REPLACEMENT When the LED indicator flashes once or is constantly flashing, replace the battery. • Unscrew the battery cover (A) from the simulator body (B). • Remove the discharged battery using the ribbon (C) and insert a new one (AAA 1,5V). Pay attention to the correct polarity of battery! •...
-
Page 11: Troubleshooting
Complete solution SAFE USAGE BEFORE USAGE • The simulator must be used in accordance with these Instructions only. Never use the simulator for purposes other than those for which it is designed. Failure to follow these instructions may expose the user to dangerous laser radiation. •... -
Page 12: Spare Parts
• stock • plumb • trigger Order replacement parts by e-mail from business@pentashot.eu or from PENTASHOT partners and dealers. A list of them can be found at www.pentashot.eu. Only the manufacturer or an authorized individual has the right to replace the simulator’s main... -
Page 13: Warranty
Complete solution WARRANTY A warranty repair shall apply exclusively to defects that have provably arisen during the effective warranty period, namely as a result of a material defect or a manufacturing defect. Defects arising in such a manner may be remedied only by the manufacturer or an authorized maintenance and service center. - Page 14 Complete solution NOTES...
- Page 16 Address: PENTASHOT EU s.r.o. Zámecká 2315/9 70200 Ostrava E-mails: jiri@pentashot.eu business@pentashot.eu info@pentashot.eu Delivery address: PENTASHOT EU s.r.o. Kosmova 1090/11 70200 Ostrava Phone numbers: +420 605 252 433 +420 773 002 110 +420 607 056 112...