Table of Contents
Advertisement
The computer saves the current state of the system in RAM and switches
off power to the CPU. The tan power indicator light flashes in this mode.
Press Fn+Esc. You can also use the PowerPanel utility to enter System
Suspend mode.
Press any key.
The state of the system is saved on the hard drive and power is turned off.
The power indicator light is off in this mode.
Press Fn+F12. You can also use the PowerPanel utility to enter System
Hibernation mode.
Turn on the computer by sliding the power switch forward. The
computer returns to its previous state.
❑
Time to return to Normal mode:
System Idle requires less time than System Suspend, and System
Suspend requires less time than System Hibernation.
❑
Power consumption:
System Idle uses more power than System Suspend, and System
Suspend uses more power than System Hibernation.
Advertisement
Table of Contents
