Advertisement
Quick Links
with Full Mortar Bed Adapter Kit
U.S. Patent No. 8,474,068
Patents Pending: Canada & EP Publication No. 2354339
1.
GENERAL INFORMATION
FreeStyle Linear Drain is a low-profile linear drain with flat base and internal slope constructed from one-piece of PVC or ABS.
A membrane clamping collar assures a watertight seal with Noble waterproofing sheet membrane. The FreeStyle Linear Drain
is available in 7 drain lengths and with 5 strainer options.
2.
FULL MORTAR BED INSTALLATION
Complete the FreeStyle Linear Drain installation instructions up to step 4.2 and STOP. A Shower Pan Liner such as
Color Logo and Logo w/Slogan
Chloraloy
will be required to replace NobleSeal Flashing and is sold separately by Noble Company. Outside Corners are also
®
recommended and sold separately. Proceed with the Full Mortar Bed installation instructions outlined below once the flashing
has been installed securely to the drain.
2.1 RECOMMENDED TOOLS:
• Tape measure
• Caulking gun
• Small floor roller
• Margin trowel
• PVC or ABS cement
2.2 FULL MORTAR BED ADAPTER KIT HARDWARE AND MATERIALS: *Denotes items that are sold separately
Brackets
Simple Solutions... Proven Performance
Additional Hardware Included:
A) Bracket Screw:
A
B
C
B) Strainer Height Adjustment Screw:
Black Logo and Logo w/Slogan
C) Strainer to Base Screw:
Simple Solutions... Proven Performance
FreeStyle Linear Drain
• Utility knife
• Straight edge
• V-notched trowel (1/8" x 1/8" or 1/4" x 1/4" )
• Square-notched trowel (1/4" x 3/8" x 1/4")
• Appropriate plastic pipe primer
Mortar Guard
Foam Block
#8 1/2" Phillips Pan Head
#10 2-1/2" Phillips Flat Head
Note: Replaces Strainer Height Adjustment
screws from original FreeStyle Linear Drain Kit.
#6 2-1/4" Phillips Pan Head
Note: Replaces Strainer to Base screws from
original FreeStyle Linear Drain Kit.
Installation Instructions
www.noblecompany.com
White and Color Logo and Logo w/Slogan
PVC or CPE
Outside Corner*
Simple Solutions... Proven Performance
VIEW MORE PRODUCT
DETAILS, VIDEOS, AND
DIAGRAMS ONLINE
™
White and Transparen
Chloraloy*
Note: Replaces NobleSeal
®
Flashing
from FreeStyle Linear Drain.
Simple Solutions.
Pre-Strainers
Strainer
Clamping Collar
Solid White Logo and Logo w/Slogan
Drain Base
Simple Solutions... Proven Performance
Advertisement
Summary of Contents for Federal Process Corporation Noble Company FreeStyle Linear Drain
-
Page 1: Installation Instructions
FreeStyle Linear Drain ™ with Full Mortar Bed Adapter Kit Installation Instructions U.S. Patent No. 8,474,068 Patents Pending: Canada & EP Publication No. 2354339 www.noblecompany.com GENERAL INFORMATION FreeStyle Linear Drain is a low-profile linear drain with flat base and internal slope constructed from one-piece of PVC or ABS. A membrane clamping collar assures a watertight seal with Noble waterproofing sheet membrane. - Page 2 FASTEN DRAIN BASE TO SUB FLOOR 5.1 FOR CONCRETE SUB-FLOOR: 5.1.A Mark for Anchors and dry fit drain base over waste pipe. 5.1.B Mark all holes in outside flange of drain base on concrete floor. 5.1.C Remove drain base and drill 1/4” holes, 1-1/2” deep where marked. 5.1.D Drive plastic anchors flush in all holes.
- Page 3 12. INSTALL BRACKETS 12.1 Align holes in Bracket with second set of holes in from end of drain base. 12.2 Attach using two 1/2” screws. Repeat for opposite end of drain base. Do not over-tighten screws. 13. INSTALL FOAM BLOCK: Lay Foam Block in brackets and align ends of foam with inside edge of Clamping Collar. 14.
- Page 4 23. ADJUST STRAINER HEIGHT 23.1 Remove strainer and tape from strainer. If factory installed film, start peeling at one end of strainer. Peel side to side (saw tooth pattern) to other end of strainer. Remove any remaining residue and polish by wiping with a Tub O’ Towel ®...