Test the Rule
To test the Rule, apply it to an IP Group.
IP group profile window with rule applied
1. Select AllUsers from the IP Groups.
2. Select Group Profile.
3. In the Available Filter Levels field, select the Rule you created.
4. Click Apply in the bottom right corner.
5. Access the Internet from an IP address within the Sales group.
6. Attempt to access a Web site obviously included within the blocked categories
contained in the Rule. The site will be blocked.
7. Access the Internet via an IP address not included in the Sales range and
attempt to access the same URLs. Access will not be blocked.
8. Repeat with several Web sites and different categories, if desired.
M86 S
, R3000 E
ECURITY
VALUATION
G
UIDE
C
T
R3000 G
ONFIGURE AND
EST THE
ROUP SETTINGS TESTS
15