Advertisement
Please read this manual carefully before using the Alphatron EVF bracket!
!
CAUTION
Please ensure that the Alphatron EVF is aligned correctly to the mounting plate (F)
before tightening the thumbscrew (E). A misalignment of the EVF unit could lead to
damaging the EVF surface.
A
Clamping knob 15mm bars
B
Clamping knob side adjustment
C
Clamping knob length adjustment
D
Clamping knob arm rotation point
E
Thumbscrew EVF
F
EVF mount plate and rotation point
G
Clamping part 15mm bars
Assembling the Alphatron EVF bracket
CAUTION: don't tighten clamping bolt (L) without a 15mm rod
inserted.
Please insert the 15mm rod (J) in the EVF mount part (F) and align
the slot as shown in "figure 2". When the rod is fully inserted and
aligned please tighten bolt (L) using a metric hex-key 3mm. Rotate
the hex-key clockwise to tighten and counter-clockwise to loosen the
bolt.
Note: the EVF mount part can be clamped to any 15mm rod or
accessory mount.
INSTRUCTION MANUAL
Figure 1: Alphatron EVF bracket nomenclature.
H
I
J
K
L
M
N
Instruction Manual: Alphatron EVF bracket
Alphatron EVF bracket
Sliding part
Arm rotation point
15mm rod 180mm (7.1") length
1/4" end cap
Clamp bolt EVF mount
Friction adjustment bolt arm rotation point
Friction adjustment bolt EVF rotation point
Figure 2: Assembling EVF mount part.
EN
Page: 1 / 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Alphatron EVF
- Page 1 Please read this manual carefully before using the Alphatron EVF bracket! CAUTION Please ensure that the Alphatron EVF is aligned correctly to the mounting plate (F) before tightening the thumbscrew (E). A misalignment of the EVF unit could lead to damaging the EVF surface.
- Page 2 Clamping the EVF bracket to the 15mm rod system The EVF bracket is designed for use with a standard 15mm rod system (rods 60mm apart). Please place the bracket clamp (G) on the rods as shown in “figure 3”. When the bracket clamp doesn’t snap on the rods please unscrewed clamping knob (A) counter-clockwise until it does.
- Page 3 Mounting the Alphatron EVF to the bracket (figure 6, 7 and 8) Please position the Alphatron EVF unit as shown in “figure 6”. The rim of the EVF must be aligned to the rim of the mount. When the EVF is positioned correctly please rotate the thumbscrew (E) clockwise (as viewed in “figure 7”) to tighten.
- Page 4 All specifications in this instruction manual are subject to change without notice. For more information please visit the Alphatron Broadcast website: www.alphatron.tv Instruction Manual: Alphatron EVF bracket Page: 4 / 2...
Need help?
Do you have a question about the EVF and is the answer not in the manual?
Questions and answers