Honda Acura NSX 2017 Emergency Response Manual page 16

Emergency Procedures
SECOND-BEST METHOD for High-Voltage Shutdown
Locate and cut the negative 12-volt battery cable and the DC to DC converter cable.
Together, cutting the negative 12-volt battery cable and cutting the DC to DC converter cable
turns off the gasoline engine and immediately shuts down the high-voltage system controllers,
thereby preventing current flow into the high-voltage cables.
1. Pull the hood release handle located on the driver's left kick-panel.
2. Locate the hood latch lever, push the lever, and lift the hood.
3. Locate the two cut point labels shown and cut them.
When cutting the cables, do not allow the cutting tool to contact any surrounding metal parts; electrical
arcing could occur, which can ignite any flammable vapors.
NOTE: If you cannot do either method to stop the engine and prevent current flow into the high-voltage cables,
use extreme care and do not touch damaged cables as they may be electrically charged.
Cut = x2
HIGH-VOLTAGE SHUTDOWN PROCEDURE
Page 16 of 19
Page 16 of 19