Toro 22618 Operator's Manual page 15

Connecting and Checking the
Lights
1. Connect the electrical plug of the machine with
the electrical plug of the tow vehicle
Figure 17
Note:
The machine uses a standard 4-pin, flat
plug. If your tow vehicle has a different type
of plug, obtain an adapter from an automotive
parts store.
2. Ensure that the tow vehicle is in N
engage the parking brake, and start the engine.
3. Test the lights as follows:
A. Turn on the headlights of the tow vehicle.
Note:
The tail lights of the machine should
illuminate.
B. Press the brake pedal of the tow vehicle.
Note:
The brake lights of the machine
should illuminate.
C. Operate each turn signal of the tow vehicle
in turn.
Note:
The corresponding turn-signal lights
of the machine should illuminate.
(Figure 17).
G020828
g020828
,
EUTRAL
15