Getting Connected; Connecting To The Internet - Alcatel 3 5053A User Manual

Table of Contents

Advertisement

6

Getting connected .................

To connect to the internet with this phone, you can use
GPRS/EDGE/3G/4G networks or Wi-Fi, whichever is
most convenient.

6.1 Connecting to the internet

6.1.1 GPRS/EDGE/3G/4G
The first time you turn on your phone with your
SIM card inserted, it will automatically configure your
network service: GPRS, EDGE , 3G or 4G.
If the network is not connected, you can turn on mobile
data in Settings > Network & connection > Data usage.
To check the network connection you are using, touch
Settings > Network & connection > Cellular network >
Access Point Names or Network carriers.
To create a new access point
A new GPRS/EDGE/3G/4G network connection can be
added to your phone with the following steps:
• Touch Settings > Network & connection > Cellular
network > Access Point Names.
• Touch
and enter the required APN information.
69
• When finished, touch
To enable data roaming
• Touch Settings > Network & connection > Cellular
network > Data roaming.
• When data roaming is disabled, you can still perform
data exchange with a Wi-Fi connection (refer to
"6.1.2 Wi-Fi").
To set preferred network mode
• Touch Settings > Network & connection > Cellular
network > Preferred networks.
6.1.2 Wi-Fi
You can connect to the internet when your phone is
within range of a wireless network. Wi-Fi can be used
on your phone even without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch Settings > Network & connection > Wi-Fi.
• Turn on
.
• Once Wi-Fi is turned on, detected Wi-Fi networks
are listed.
and then Save.
70

Advertisement

Table of Contents
loading

Table of Contents