auna multimedia Kara Projectura 10030546 Manual page 35

3 . Project an image on the screen and adjust the picture so that it fits the screen
Note: When using a screen with an uneven surface, stripes pattern may rarely appear on
the screen depending on the distance between the screen and the unit or the zooming
magnifications. This isnot a malfunction of the unit.
Tart-up and shut down the projector
1 . . Press Projector ON/OFF button to turn on the unit . The lens protector will open .
2 . Press Projector LED button Close projection display output .
3 . . Press Projector MEUN button on the projector to turn the menu on . Press / and / to
select a desired menu and making various adjustments and settings, press ENTER to confirm.
Press MENU to leave and save the settings .
Picture menu
Picture mode, Colour Temperature, Aspect Ratio, Noise Reduction and Screen options .
Please note that the menus vary according to the signal type selected .
Adjusting the projection focus
The projector lens is placed perpendicular to the projection screen, press the Projector MEUN button
to display the menu screen, rotate the lens until the clear text display .
35