Sony VGX-XL1 User Manual page 74

Loading Media Changer
1 Make sure the Changer/Recorder is
properly connected to the Personal
Computer and is turned on.
Note: When loading discs, make
sure that the label is facing to the
right of the slot.
2 To load a single disc, press the
Load button once and insert the disc
in the slot. To load multiple discs,
press the Load button twice and
insert each disc in the slot one at a
time. The drive will be blocked until
the system is ready for the next disc.
3 Once the discs have been inserted,
they must be scanned by Media
Center before they can be viewed.
Go to More Programs
Manage Discs or to
4 Click Yes on the
FOUND message to update your
library with the new disc(s)
information.
Loading Media Note: It will take about 30 seconds for Media Center to scan each disc. It is
recommended to insert each disc into the changer, and then let them all scan one after the other. For
additional information, go to the Manage Discs topic in My Changer.
66
and select
My DVDs
NEW DISCS
Unloading Media Changer
To eject discs using Media Center:
1 From Media Center, go to
Changer and select
2 Select the Eject button associated
with the disc you want to eject.
To eject discs manually:
1 Press the Eject button one time to
eject the last inserted disc.
or
2 Press the Eject button two times to
eject all discs in the changer slots.
This will not eject the engaged disc
in the changer drive. You must go to
Media Center to eject the last disc.
See steps 1 through 2 of To eject
discs using Media Center.
My
Manage Discs.