Ble232 Configuration Via Serial Port; Ble232 Configuration Main Menu - taskit BLE232 Manual

Register description

4.2. BLE232 configuration via serial port

Open a serial console program to change the settings of the BLE232 module. After power
up, you have a certain time to go into the setting menu (default: 500ms). At this time
should you go into the setting menu with three plus signs (+++).
Figure 4.1. BLE232 configuration via serial port
Press any key to continue. Navigate through the menu using the number keys. In this
menu you can change settings of the serial port, Bluetooth low energy, idle timeout and
debug report. The changes are stored in the device's internal flash memory.
Figure 4.2. BLE232 configuration main menu
6