Table of Contents
Advertisement
Listening to the radio (continued)
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
Each time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM nAMn UKV*
* When you select this band, "STEREO
PLUS" appears in the display.
2
Press TUNING MODE repeatedly
until "PRESET" appears in the
display.
MANUAL n AUTO n PRESET
3
Press TUNING +/– (or PRESET +/–
on the remote) to tune in the desired
preset station.
Wide display
Preset number
Normal display
Preset number Frequency
14
Frequency
To
Do this
Turn off the radio
Press 1/u.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until "MANUAL" appears, then press
TUNING +/– to tune in the desired station.
Tips
• Pressing TUNER/BAND while the system power
is off automatically turns on the system and tunes
in the last received station (One Touch Play).
One Touch Play is not available in Power Saving
mode.
• You can switch from another source to the radio
by pressing TUNER/BAND (Automatic Source
Selection).
• If an FM program is noisy, press STEREO/
MONO so "MONO" appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.
Hide quick links:
Advertisement
Table of Contents
