Abtech BOSUNS Manual

ABBC Chair - user instruction_Layout 1 28/04/2016 10:23 Page 1
PRODUCT RECORD CARD
THIS DOCUMENT SHOULD BE ISSUED WITH AND KEPT FOR EACH ITEM OR SYSTEM
• Please see the product label details required below.
• Consult the User Guide for advice on inspection, maintenance, lifespan etc. Other
components within any fall arrest system in which products are used should conform to the
relevant European standards (ENs) or in their absence other appropriate standards.
Product Label Definitions
1. Manufacturers name and contact details
2. Manufacturers product code
3. Date of manufacture
4. Read instructions supplied with product
5. Identifying number of manufacture examination body
6. Serial Number
7. European standard that the product conforms to
1
Tel: +44(0)1244 837 050
email: sales@abtechsafety.com
2
Model: AB10 STD
Date of Manufacture: 09/2012
3
4
READ INSTRUCTIONS BEFORE USE
All PPE Products within this User Guide conform to the European Standards stated and
are the subject of EC Certificates of Conformity issued by:
National Engineering Laboratory, East Kilbride, Glasgow, G75 0QU
Tel: +44 (0)1355 220 222 Fax: +44(0)1355 272 047
Article 10 89/686/EEC
All PPE Products within this User Guide are in conformity with the provision of the Council
Directive 89/686/EEC, under the supervision of the Notified Body:
Satra Quality Assurance Ltd, Wyndham Way, Kettering, Northamptonshire NN16 8SD.
Tel: +44 (0)1536 410 000 Fax: +44(0)1536 410 626
Article 11B 89/686/EEC
Abtech Safety Ltd, Units 1&2 Parkway Business Centre, Sixth Avenue,
Deeside Industrial Estate, Flintshire, CH5 2LE
Tel: +44(0)1244 837 050 Fax: +44(0)1244 837 051
sales@abtechsafety.com www.abtechsafety.com
MANUFACTURE DETAILS
PRODUCT CODE
FINAL INSPECTION PRIOR TO DESPATCH BY
5
6
Serial Number: XXXXXX
7
Conforms to: BS EN 361:1993
PRODUCT SERIAL NUMBER
DATE
BOSUNS CHAIR
THE USER MUST ALWAYS WEAR A FULL BODY HARNESS WHEN USING A BOSUNS CHAIR
NOT PPE
PRODUCT CODE: ABBC
1. Adjustable back and side lifting strops.
2. Aluminum spreader bar.
3. Foot bar.
4. Side pockets, velcro seal.
5. Padded wooden seat.
6. Carbon steel plated fittings.
7. Heavy duty PU.
8. Front safety strap.
The Abtech Bosuns Chair is lightweight,
strong and comfortable. It is designed for
users who require a safe comfortable
work platform from which to work from
height over long periods of time.
The bosuns chair has an integral safety
strap to prevent the user and the chair
separating. The user should anchor the
primary line, which holds the bosuns chair
to an adequate anchor point. The user
should wear a full fall arrest harness
attached to a secondary line. This line
should also be anchored to an adequate
anchor point (EN795).
Pockets are provided on either side of the
bosuns chair. These pockets are robust
and designed to carry hand tools and nuts
and bolts.
A padded seat and foot bar allow the user
to sit in comfort.