6: Setting Up The Sub Woofer - Sony HTP-1200 Operating Instructions Manual

x PL. XXXX
SL SR
(Surround speaker placement)
Lets you specify the height of your surround speakers
for proper implementation of the surround effects of
the Cinema Studio EX modes (page 24).
B
A
• LOW
Select if the height of your surround speakers
corresponds to section A.
• HIGH
Select if the height of your surround speakers
corresponds to section B.
B
60
A
30
6: Setting up the sub
woofer
Listening to the sub woofer
POWER
POWER
POWER indicator
Before playing the program source, set the
volume to minimum on the receiver.
1
Turn on the receiver.
2
Press input buttons (e.g., DVD) to
select the program source (e.g., DVD
player).
Tip
You can also use INPUT SELECTOR on the
receiver to select the program source.
3
Press POWER on the sub woofer.
The POWER indicator on the sub woofer
lights up.
4
Play the program source.
Adjusting the level
Slight adjustments to the system can enhance
your sound enjoyment.
POWER
Turn LEVEL to adjust the volume.
Set the volume level to best suit your preference
according to the program source.
Note
Do not set the volume of the sub woofer to maximum.
Extraneous noise may be heard.
LEVEL
MIN MAX
LEVEL
MIN MAX
LEVEL
15 GB