Statement Thank you for purchasing this product. Please read this user manual carefully before use. We reserve the right to make changes to the product without notice. Safety Precaution Do not dismantle the housing or modify the module. Do not expose the unit to rain, moisture or install this product near water. ...
Product Introduction Thank you for choosing the HDMI 2.0 1x4 Splitter, which can distribute one HDMI input to four outputs. The splitter supports HDMI video resolution up to 4K@60Hz 4:4:4, 1080P 3D, and multichannel audio formats. It also passes the EDID information from the display, The multiple built-in EDID settings can be selected by the 4-pin DIP switch on the front panel.
corresponding channel. ④ EDID: 4-pin DIP switch for EDID setting and HDCP mode selection. Please refer to the EDID Management for more details. ⑤ FW: Micro-USB port for firmware upgrade. Rear Panel DC 5V ① INPUT: Type-A female HDMI input port to connect a HDMI source. ②...
Page 5
Switch 1~3 are used for EDID setting. The DIP switch status and its corresponding setting are shown at the back of the product. EDID Setting Default Priority OUT 1 > 2 > 3 > 4 4K/30Hz LPCM Priority OUT 4 > 3 > 2 > 1 4K/30Hz DTS/Dolby 1080p LPCM 4K/60Hz LPCM...
Video Resolution Down-scaling The product supports video resolution down-scaling, the 4K input can be automatically downgraded to 1080P output for compatibility with 1080P display, shown below . Input Output Color Resolution Refresh Downscale 1080P Specs Space 3840x2160 4:4:4 Support 1080P@60Hz 4:4:4 3840x2160 4:4:4 Support...
System Connection The following diagram illustrates the typical input and output connection of the splitter: 4K/60 Display 4K/60 Display 4K/60 Blu-ray 1080p Dis play 4K@60 4:4:4 HDR Down Scaling Down Scaling 1080p Dis play...