1. Manuals
  2. Brands
  3. DPtech Manuals
  4. IP Access Controllers
  5. WCS7000 Series
  6. User configuration manual

DPtech WCS7000 Series User Configuration Manual

Wireless access controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DPtech WCS7000 Series Wireless Access Controller
User Configuration Guide
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WCS7000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DPtech WCS7000 Series

  • Page 1 DPtech WCS7000 Series Wireless Access Controller User Configuration Guide...
  • Page 2 Hangzhou DPtech Technologies Co., Ltd. provides full- range technical support. If you need any help, please contact Hangzhou DPtech Technologies Co., Ltd. and its sale agent, according to where you purchase their products. Hangzhou DPtech Technologies Co., Ltd. Address: 6th floor, zhongcai mansion, 68 tonghelu, Binjiangqu, Hangzhoushi...
  • Page 3 Owing to product upgrading or other reasons, information in this manual is subject to change. Hangzhou DPtech Technology Co., Ltd. has the right to modify the content in this manual, as it is a user guides, Hangzhou DPtech Technology Co., Ltd. made every effort in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind express or implied.

  • Page 4: Table Of Contents

    Table of Contents CHAPTER 1 PRODUCT OVERVIEW 1.1 P RODUCT NTRODUCTION 1.2 WEB M ANAGEMENT 1.2.1 L OGIN TO THE MANAGEMENT INTERFACE 1.2.2 WEB I NTERFACE AYOUT CHAPTER 2 SYSTEM MANAGEMENT 2.1 I NTRODUCTION TO SYSTEM MANAGEMENT 2.2 D EVICE MANAGEMENT 2.2.1 D EVICE INFORMATION 2.2.2 D...
  • Page 5 3.4 F ORWARDING CONFIGURATION 3.4.1 F ORWARDING CONFIGURATION 3.5 U NICAST ROUTING 3.5.1 S TATIC ROUTE 3.5.2 R OUTING TABLE 3.5.3 E QUIVALENT ROUTING 3.5.4 RIP 3.5.5 OSPF PROTOCOL 3.6 ARP CONFIGURATION 3.6.1 D ISPLAY 3.6.2 S TATIC 3.6.3 G RATUITOUS SENDING 3.7 DNS C...
  • Page 6 5.4.3 D ESTINATION 5.4.4 O NE TO ONE 5.4.5 A DDRESS 5.4.6 A ONFIGURATION 5.5 NAT_PT 5.6 B ASIC TTACK ROTECTION 5.6.1 B ASIC TTACK ROTECTION 5.6.2 B ASIC TTACK UERY 5.7 S ESSION IMIT 5.8 S ERVICE IMIT 5.9 IP ASIC 5.9.1 D EFEND...
  • Page 7 6.2.1 L ATEST LOG 6.2.2 S YSTEM UERY 6.2.3 S YSTEM PERATION 6.2.4 S YSTEM ONFIGURATION 6.3 O PERATION LOG 6.3.1 L ATEST LOG 6.3.2 O PERATION UERY 6.3.3 L PERATION 6.3.4 O PERATION ONFIGURATION 6.4 S ERVICE 6.4.1 S ERVICE ONFIGURATION CHAPTER 7 USER AUTHENTICATION...
  • Page 8 List of Figures Figure1-1 WEB management interface .......................... 3 Figure1-2 Deploying of WEB Interface .......................... 5 Figure2-1 System management menu ..........................7 Figure2-2 Device information ............................8 Figure2-3 Device status ..............................9 Figure2-4 Device information settings .......................... 10 Figure2-5 System name settings............................. 10 Figure2-6 System time configuration ..........................
  • Page 9 Figure3-13 Forwarding configuration ..........................40 Figure3-14 configuring static route ..........................42 Figure3-15 Health check ..............................42 Figure3-16 Basic routing table ............................42 Figure3-17 Displaying detailed routing table ........................ 43 Figure3-18 Equivalent routing ............................44 Figure3-19 Configure RIP .............................. 44 Figure3-20 Display RIP state ............................46 Figure3-21 Configuring OSPF protocol ........................
  • Page 10 Figure5-19 Traffic status and monitoring ........................84 Figure5-20 DDOS defend settings ..........................85 Figure5-21 Protection history ............................86 Figure5-22 Protection configuration ..........................86 Figure5-23 Traffic Trend Art ............................87 Figure5-24 Protection history ............................87 Figure5-25 Blackname configuration ..........................88 Figure5-26 Blackname query ............................89 Figure5-27 Blacklist log query ............................
  • Page 11 List of Tables Table2-1 Device information............................8 Table2-2 Device status ..............................9 Table2-3 System threshold ............................. 12 Table2-4 SNMP version configuration .......................... 15 Table2-5 Statistic entry ..............................18 Table2-6 Administrator management feature ........................ 19 Table2-7 Current administrator list ..........................20 Table2-8 Administrator settings .............................
  • Page 12 Table4-7 STA display management ..........................66 Table4-8 Black/white list management ......................... 67 Table5-1 Packet filtering policy configuration items ....................70 Table5-2 Configuring action ............................71 Table5-3 Packet filtering policy log ..........................73 Table5-4 Alg configuration ............................74 Table5-5 Source NAT configuration ..........................75 Table5-6 Destination NAT configuration ........................

  • Page 13: Chapter 1 Product Overview

    It fully meet man’s need on get rid of the wired constraint, realizing mobile office and wireless online requirement anytime and anywhere. 7000 series wireless access controller is a new generation products developed by Hangzhou DPtech Technologies Co., Ltd for the telecom operators. It can realize wireless network comprehensive management for FIT AP+AC mode and simply network configuration, realizing network monitoring status and enhance network expandability.

  • Page 14: Web Interface Layout

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Caution: It is recommended that you should use IE 6.0 or higher. The resolution should be 1024 x 768 or higher. <Backward>, <Forward> and <Refresh> are not supported on the Web management interface. If you use these buttons, the Web page may not be displayed properly.

  • Page 15: Figure1-2 Deploying Of Web Interface

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure1-2 Deploying of WEB Interface (1)Navigation bar (2)Shortcut area (3)Configuration area Navigation bar: Lists all of the Web management function menus. You can choose the desired function menu, which is shown in the configuration area.

  • Page 16: Chapter 2 System Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Chapter 2 System Management 2.1 Introduction to system management System management provides device and system related management functions, including:  Device management  SNMP configuration  RMON configuration  Administrator ...

  • Page 17: Device Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure2-1 System management menu 2.2 Device management 2.2.1 Device information Device information module can help user to understand system and device hardware related information, includes system name, system time, system time zone, memory size, external memory information, device serial number, PCB hardware version, software version, factory default management port, CPLD hardware version, Conboot version and power supply.

  • Page 18: Figure2-2 Device Information

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure2-2 Device information Table2-1 describes the details of Device Information fields. Table2-1 Device information Item Description System name Displays the name of the system. System time Displays current time of the system.

  • Page 19: Device Status

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 2.2.2 Device status Device status page displays the health status of the current system, helping user to understand CPU, internal memory, hardware disk, CF card utilization, and fan and power s supply’s status and CPU and mainboard temperature.

  • Page 20: Device Settings

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Note: Put your mouse cursor on an indicator, and then you can view the relevant real-time data. 2.2.3 Device settings 2.2.3.1 Device information settings Device information settings provide system name and system modification for user. User can set system threshold and select whether to enable remote diagnosis function according to requirement.

  • Page 21: Figure2-6 System Time Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide System time feature allows user to define system time and synchronize with current time. Select AC > System management > Device management > Configuration > Device information settings from navigation tree from navigation tree to enter the system time configuration page, as shown in Figure2-3.

  • Page 22: Figure2-9 System Threshold

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Select AC > System management > Device management > Configuration >Information settings from navigation tree to enter the system threshold page, as shown in Figure2-9. Figure2-9 System threshold Table2-3 describes the details of System threshold.

  • Page 23: Figure2-11 Setting Frame Gap

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Select AC > System management > Device management > Configuration > Information settings from navigation tree to enter the setting frame gap page, as shown in Figure2-11. Figure2-11 Setting frame gap...

  • Page 24: Snmp Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Select whether to enable the blacklist take effect immediately function  Select packet filtering policy take effect immediately function  AC internal memory specification configuration, default is 2. Unit: MB ...

  • Page 25: Figure2-14 Snmp Version Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide As an application module that resides in a network device, an agent maintains the information of the managed devices, responds to NMS requests, and sends the data to the NMS.

  • Page 26: Figure2-15 Device Information

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description  SNMP v3 None: means version 3 is not authenticated and not encrypted group.  MD5： None (version 3 is not authenticated and not encrypted group or it authenticated but it isn`t encrypted group）...

  • Page 27: Rmon Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Configure the device information, contact information, Trap destination host relevant parameter.  Click Ok button in the upper right corner on the webpage, new configuration will take effect immediately.

  • Page 28: Figure2-17 Alarm Entry

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure2-17 Alarm entry 2.4.2.2 Statistic entry Statistic entry provides user with the RMON data monitoring statistical table, so that user can understand the current network performance. Select AC > System management > RMON configuration > Alarm > Statistic entry from navigation tree to enter the statistic entry page, as shown in Figure2-18.

  • Page 29: Administrator

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description Collisions Displays the collision number of the current network traffic. Receiving packet partition statistic Displays the receiving packet partition statistic, according to the packet length to statistic. (length) 2.5 Administrator...

  • Page 30: Figure2-19 Current Administrator

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure2-19 Current administrator Table2-7 describes the details of current administrator list. Table2-7 Current administrator list Item Description Administrator Displays the name of the administrator who has logged into the device.
  • Page 31 DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description It consists of letters, digitals, which allow you to use the special characters such as ()-+=|[]:;/_, and the length should be 3 to 128 characters. Confirm password System will prompt you the password you entered is not consist with the confirm password when you submit it to the system.
  • Page 32 DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  If you want to modify administrator’s password, move your mouse to the password, and then the mouse pointer becomes the pencil icon and then click your mouse left button to modify the password.

  • Page 33: Figure2-21 Administrator Authentication Settings

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure2-21 Administrator authentication settings Table2-9 describes the details of the administrator authentication method and configuration parameter. Table2-9 Administrator authentication method and configuration parameter Item Description Local authentication To authenticate the username and password of the administrator through the device.

  • Page 34: Figure2-22 Logon Administrator Settings

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description  Administrator password 2.5.2.4 Logon administrator settings You can set several login parameters about web security, including timeout time, login locked times and unlock time after locked and the password strength.

  • Page 35: Configuration Range

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Caution: If an administrator has locked and no matter you entered is correct when you login again, the system will prompt you “user has been lock, please try again later!”...

  • Page 36: Interface Service Limit

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Select AC > System management > Administrator > Web access protocol from navigation tree to enter the web access protocol settings page, as shown in Figure2-24. Figure2-24 WEB access protocol settings Table2-12 describes the details of web access protocol settings.

  • Page 37: Remote User Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure2-25 Interface service limit Table2-13 describes the details of the interface service limitation. Table2-13 Interface service limitation Item Description Interface name Allows you to select an interface to be limited.

  • Page 38: Configuration File

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description Last operation time Displays the user last operation time Operation Click icon that you can quit an administrator forcedly. Caution: User can enable the telnet and ssh remote login method at the same time, but only one kind can be used.

  • Page 39: Software Version

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description Operation You can save, export and switch and delete configuration file. Factory default file only can be switched. To create configuration file, you should:  Click Create Configuration File button in upper right corner ...

  • Page 40: Figure2-28 Software Version

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure2-28 Software version Table2-16 describes the details of the software version. Table2-16 Software version Item Description Software version name Displays the name of the in used software version and other software versions.

  • Page 41: Ntp Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 2.8 NTP configuration Network Time Protocol (NTP) is used to synchronize device clock in the network, keeping all devices time synchronization, so that it can provide multiple application based on time synchronization.

  • Page 42: Chapter 3 Network Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure2-30 NTP client configuration Table2-18 describes the details of NTP client mode. Table2-18 NTP client mode Item Description NTP server address Allows you to configure the NTP server IP address and domain name; Select whether to enable authentication.

  • Page 43: Interface Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Policy-based routing  ICMP  MPLS configuration  ARP configuration  DNS configuration  DHCP configuration  BFD configuration  Diagnostic tools  Lan Switch Figure3-1 Network management menu 3.2 Interface management...

  • Page 44: Network Mode

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 3.2.1 Network mode According to requirement, user configure device interface working mode and select interface type. If you select the layer 2 interface, you should configure Vlan ID number. If you select the layer 3 interface, you should configure the IP address of layer 3.

  • Page 45: Service Interface Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Select AC > Network management > Interface management > Configure VLAN from navigation tree to enter the VLAN interface configuration page, as shown in Figure3-3. Figure3-3 VLAN interface configuration 3.2.2.2 VLAN configuration VLAN configuration allows user to add or delete VLAN ID in batch and allows user to view the type and include which port.

  • Page 46: Network Object

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-5 Service interface configuration 3.2.3.2 Interface rate limitation alarming Select AC > Network management > Interface management > Service interface > Interface Rate Beyond Warming from navigation tree to enter the interface rate limitation alarming, as shown in Figure3-6.

  • Page 47: Figure3-8 Address Object

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-8 Address object Table3-1 describes the details of the address object. Table3-1 Address object Item Description Serial number Displays the serial number of the IP user group. Name Displays the name of IP user group.

  • Page 48: Mac Address

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table3-2 describes the details of the address object group. Table3-2 Address object group Item Description Address object Displays the user group in the address object. Address object group Create an IP address object group and add IP address into IP address object group.

  • Page 49: Mac Address Table Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-11 MAC group Table3-3 describes the details of the MAC group. Table3-3 MAC group Item Description MAC address Displays the created MAC address user group in MAC address object. MAC group Create a MAC group and drag MAC address object into MAC group.

  • Page 50: Forwarding Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table3-4 MAC address table Item Description Select a querying item Configure the querying item to view the MAC address table Serial number Serial number of the MAC address table MAC address Displays the MAC address to be added.

  • Page 51: Static Route

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 3.5.1 Static route 3.5.1.1 Configuring static route Static route is a kind of special routing configured by the administrator manually. After you configure a static routes, data message will be forwarded to the specify destination as administrator requirement.

  • Page 52: Routing Table

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-14 configuring static route To configure static routes in batch, you should:  Click Browse button to import static route file from your local computer.  Click Ok button ...

  • Page 53: Figure3-17 Displaying Detailed Routing Table

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table3-5 describes the details of displaying basic routing table. Table3-5 Displaying basic routing table Item Description Destination network segment View destination network segment IP address. Subnet mask View the subnet mask of destination network segment IP address.

  • Page 54: Equivalent Routing

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description cost Allows you to view the static route cost. Type Allows you to view the static route type. 3.5.3 Equivalent routing Equivalent routing (ECMP) is that there are multiple different route paths with the same Cost value exists in the network for the purpose of arriving to the same destination IP address or destination segment.

  • Page 55: Table3-7 Rip Advanced Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table3-7 describes the configuration items of RIP advanced configuration. Table3-7 RIP advanced configuration Item Description Route priority Allows you to configure the route priority. Router update timer Allows you to configure the router update timer.

  • Page 56: Ospf Protocol

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-20 Display RIP state 3.5.5 OSPF protocol Open Shortest Path First (OSPF) is a link state interior gateway protocol developed by the OSPF working group of the Internet Engineering Task Force (IETF). At present, OSPF version 2 (RFC2328) is used.

  • Page 57: Figure3-21 Configuring Ospf Protocol

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-21 Configuring OSPF protocol Table3-9 describes the details of the OSPF advanced configuration Table3-9 OSPF advanced configuration Item Description Route priority Configure the route priority of the device. Route device ID Configure the ID number of the route device.

  • Page 58: Table3-10 Ospf Area Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Click Ok button in the upper right corner on the webpage. Table3-10 describes the details of OSPF area configuration Table3-10 OSPF area configuration Item Description Area ID Configure the ID number of the area.

  • Page 59: Figure3-22 Displaying Ospf Interface Information

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Configure OSPF authentication information for the interface (including None, Test authentication and Md5 authentication)  In the advanced configuration, you should select cost value, dr election priority, working mode and interface type for the interface.

  • Page 60: Figure3-23 Displaying Ospf Neighbor Information

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Select an item to be queried  Type in the keyword that you want to query on the OSPF interface information page  Click Query button 3.5.5.3 Displaying OSPF neighbor information Select AC>...

  • Page 61: Arp Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide To configure the OSPF interface information, you should:  Select an item to be queried  Enter the keyword to be queried on the OSPF neighbor information page  Click Query button 3.6 ARP configuration...

  • Page 62: Gratuitous Arp Sending

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-25 Static ARP Table3-14 describes the details of policy-based routing. Table3-14 Policy-based routing Item Description Serial number Displays the serial number of static ARP entry. IP address Displays the IP address of the ARP entry.

  • Page 63: Dns Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 3.7 DNS Configuration 3.7.1 Introduction to DNS Domain Name System (DNS) is a distributed database used by TCP/IP applications to translate domain names into corresponding IP addresses. With DNS, you can use easy-to-remember domain names in some applications and let the DNS server translate them into correct IP addresses.

  • Page 64: Dhcp Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 3.8 DHCP Configuration 3.8.1 Introduction to DHCP Dynamic Host Configuration Protocol (DHCP) is a network protocol for the local network using of UDP protocol. For administrators to use DHCP there are two purposes: the DHCP can automatically allocate IP addresses to the local network and it also can help administrator to central managed computers.

  • Page 65: Dhcp Relay

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description Lease period (minute) Configure the address lease duration for the address pool. Operation Click copy icon to copy an entry of DHCP configuration. Click delete icon to delete an entry of DHCP configuration.

  • Page 66: Dhcp Ip Address Table

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-29 DHCP relay Table3-18 describes the details of DHCP relay configuration. Table3-18 DHCP relay configuration Item Description Interfaces list Specify an interface which automatically obtain IP address DHCP servers list...

  • Page 67: Diagnostic Tools

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table3-19 DHCP IP address table Item Description Serial number Displays the serial number of the host. Host name Displays the hostname MAC address Displays the MAC address of the host...

  • Page 68: Chapter 4 Ap Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure3-32 Testing result of “Ping” command Chapter 4 AP Management The AP (Access Point) is the wireless the access point. Wireless access point also known as wireless bridge, wireless gateway, which is known as "thin" AP. Transport mechanism of this wireless device is equal to the hub in the wired network, which constantly receive and transmit data in wireless local area network.

  • Page 69: Figure4-1 Ap Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure4-1 AP configuration Table4-1 describes the details of the AP basic configuration Table4-1 AP basic configuration Item Description Radio Wireless radio frequency: 2G/5G. State Allows you to enable or disable the wireless radio function.

  • Page 70: Table4-2 Ssid Group Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description received. Therefore, in a WLAN where there is high error rate, you can decrease the fragment threshold to increase frame transmission reliability.  Beacon interval (time unit 100-1000, default is 100): interval for sending beacon frames.
  • Page 71 DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description SSID group Displays the SSID group configuration. SSID Displays the service set identification code, default is serial number. VLAN ID Allows you to select the SSID to which VLAN belongs.

  • Page 72: Ap Configure

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Select radio binding method, including the hidden SSID, QOS switch and the STA isolation.  Click Ok button in the upper right corner on the webpage. 4.1.2 AP configure AP settings allows user to view the various detailed information of the online AP, which also can management a single AP.
  • Page 73 DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description STA isolation: allows you to enable or disable the STA isolation function Black/white list: if you configure the black list, then MAC address in Black/White list cannot connect.

  • Page 74: Ap Basic Information

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 4.1.3 AP basic information AP basic information module is convenient for the user to view and mark AP basic information. Select AC > AP management > AP configuration > AP basic information from navigation tree to enter the AP basic information page, as shown in Figure4-3.

  • Page 75: Basic Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table4-6 describes the details of the AP basic information. Table4-6 AP version control Item Description Sequence number Displays the sequence number of the AP control policy. Type Displays the type of AP device to be unified.

  • Page 76: Ac-Ap Log

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table4-7 describes the details of the STA display management. Table4-7 STA display management Item Description Serial number Displays the serial number of the STA management table. MAC address Displays the MAC address information of the STA.

  • Page 77: Black Name Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Displays the AP reported abnormal information. 4.4 BLACK NAME Management Select AC > AP Management > BLACK MANAGEMENT from navigation tree to enter the BLACK NAME Management, as shown inFigure4-9.

  • Page 78: Chapter 5 Advanced Service

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Chapter 5 Advanced Service Advanced service module can control  Packet filtering policy  IPv6 packet filtering   NAT_PT  Basic attack protection  Session limit  Service limit ...

  • Page 79: Packet Filtering Policy

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-1 Firewall 5.2 Packet Filtering Policy 5.2.1 Packet Filtering Policy Packet filtering is to inspect the source domain, destination domain, originator source IP, originator destination IP, originator source MAC, originator destination MAC, service, IP fragment, flow re-mark, action for every data packet.

  • Page 80: Table5-1 Packet Filtering Policy Configuration Items

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table5-1 Packet filtering policy configuration items Item Description Serial number Displays the serial number of the packet filtering policy. Name Configure a name for the packet filtering policy. Source domain Specify the source domain.

  • Page 81: Figure5-3 Configuring Action

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-3 Configuring action Table5-2 describes the details of how to configure action. Table5-2 Configuring action Item Description Pass Allow packet to pass through the device. Discard Not allow packet pass through the device.

  • Page 82: Packet Filtering Policy Log

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  And then select the source domain and destination domain  And then select the initiate source IP and initiate destination IP  Select a service for the policy filtering policy, and then select the valid time of the policy filtering policy.

  • Page 83: Alg Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table5-3 Packet filtering policy log Item Description Serial number Displays the policy serial number. Time Displays when the log is created. Protocol Displays the protocol of the packet filtering policy.

  • Page 84: Packet Filtering Policy

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table5-4 Alg configuration Item Description Protocol Displays the protocol name State Displays the enabling status of alg configuration 5.3 IPv6 Packet Filtering Policy Select AC> Network > Firewall > IPv6 packet filtering policy from navigation tree to enter the IPv6 packet filtering policy, as shown in Figure5-7.

  • Page 85: Destination Nat

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-8 Source NAT Table5-5 describes the details of source NAT configuration. Table5-5 Source NAT configuration Item Description Displays the serial number of source NAT policy. Out interface Select the out interface for source NAT policy.

  • Page 86: Figure5-9 Configuring Destination Nat

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-9 Configuring destination NAT Table5-6 describes the details of destination NAT configuration. Table5-6 Destination NAT configuration Item Description Displays the destination NAT ID. In interface Displays the inbound interface of destination NAT policy.

  • Page 87: One To One Nat

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 5.4.4 One to one NAT Select AC> Advance > NAT> One to one NAT from navigation tree to enter the one to one NAT page, as shown in Figure5-10. Figure5-10 One to one NAT Table5-7 describes the details of one to one NAT configuration.

  • Page 88: Alg Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-11 Address pool Table5-8 describes the details of address pool. Table5-8 Address pool configuration Item Description Display the start IP address of address pool. Start IP address Configure the start IP address of address pool.

  • Page 89: Nat_Pt

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-12 Alg configuration Table5-9 describes the detail of Alg configuration. Table5-9 Alg configuration Item Description Protocol Displays the protocol name. State Select whether to enable or disable the protocol. 5.5 NAT_PT Network Address Translation-Protocol Translation (NAT-PT) technology is adhering to the NAT technology (RFC2663) thoughts, but they are different in principle.

  • Page 90: Basic Attack Protection

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-13 IPv6 bound 5.6 Basic Attack Protection 5.6.1 Basic Attack Protection Sometimes, normal packets transmitted in the network with attack packets which interference hosts receiving normal packets. Basic attack protection block attack packets and send logs to a remote host or displays logs on local device.

  • Page 91: Basic Attack Log Query

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table5-10 Basic attack protection Item Description Attack type Select an attack type of basic attack protection. Threshold Set the threshold of the basic attack protection. Block Click the select box of the basic attack protection, which enable the relevant protocol attack protection.

  • Page 92: Session Limit

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table5-11 Basic attack log query Item Description Serial number Displays serial number of the attack. Time Displays when the attack log is created. Attack type Displays the type of the attack.

  • Page 93: Basic Dd O S

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-17 Service Limit 5.9 IPv4 Basic DDoS 5.9.1 Defend Object Management Defend Object Management is to configure the defend object group, including IP address protected by DDoS attack protection and comment information.

  • Page 94: Configuration And Tendency

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Enter a name for the defend object management rule  On the defend object management rule page, you should configure IP address and subnet mast to be protected ...

  • Page 95: Protection History

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-20 DDOS defend settings Table5-14 describes the details of DDOS defend settings. Table5-14 DDOS defend settings Item Description Manual configure the threshold You can sleek the manual configure or auto-learning the threshold.

  • Page 96: Ipv6 Basic Ddos

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-21 Protection history 5.10 IPv6 Basic DDOS IPv6 basic DDOS ensure that the legal user and inner server through you configuration on IPv6 DDOS configuration. 5.10.1 Configuration and Tendency 5.10.1.1 Protection History Select AC>...

  • Page 97: Protection History

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Check/protect You can configure it as check + protect. Protection parameter Configure the advanced DDOS detect threshold. 5.10.1.2 Traffic Trend Chart Select AC> Firewall > Advanced DDOS Protection > Protection history> Traffic Trend chart from navigation tree to enter the traffic trend chart page, as shown in Figure5-23.

  • Page 98: Blackname

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 5.11 Blackname 5.11.1 Blackname Blacklist is an attack prevention mechanism that filters packets based on source IP address. Blacklists are easier to configure and fast in filtering packets sourced from a particular IP address.

  • Page 99: Blacklist Query

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 5.11.2 Blacklist Query Select AC > Advance> Blackname >Blackname query from navigation tree to enter the blacklist query page, as shown in Figure5-26. Figure5-26 Blackname query Table5-17 describes the details of blacklist query.

  • Page 100: Mac/Ip Binding

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description Lifecycle Displays the blacklisted IP address lifecycle in blacklist log query. Add reason Displays the add reason of blacklisted IP address. To query the blacklist log, you should: ...

  • Page 101: Figure5-28 Mac/Ip Binding

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-28 MAC/IP Binding Table5-19 describes the details of MAC/IP binding Table5-19 MAC/IP binding Item Description IP address Displays the binding IP address. MAC address Displays the binding MAC address. MAC address getting method Displays the MAC address getting method.

  • Page 102: Auto-Learning

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table5-20 Switches table Item Description Switches IP address Specify the switches IP address. SNMP read community Specify community sting of the switches Operation Click the copy icon, and then you can copy a binding record.

  • Page 103: User Mac Binding

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description can select, unbinding, bind, not bind. To configure auto-learning function, you should:  Click Auto learn from packet button to learn MAC/IP binding from data packet  Click Auto learn from layer 3 switch button to learn MAC/IP binding from layer 3 switch ...

  • Page 104: User/Ip Binding

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide  Select an option for the How obtain MAC address method  And then click Ok button in the upper right corner on the webpage  And then if you want to import MAC/IP binding in batch, click Browse button and select a CSV file from your local system.

  • Page 105: Session Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Select AC > Advance > MAC/IP binding > MAC/IP binding log query from navigation tree to enter binding log query page, as shown in Figure5-23. Figure5-32 binding log query Table5-24 describes the details of MAC/IP binding log query.

  • Page 106: Session List

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 5.13.1 Session List Select AC> Advance > Session Management > Session List page from navigation tree to enter the session list page, as shown in Figure5-33. Figure5-33 Session list 5.13.2 Session Parameter Select AC >...

  • Page 107: Session Log Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-35 Session Monitoring 5.13.4 Session Log Configuration Select AC> Advance > Session Management > Session Log Configuration from navigation tree to enter the session log configuration page, as shown in Figure5-36.

  • Page 108: Traffic Classification

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table5-25 bandwidth guarantee basic set Item Description Name Displays the policy name of VIP bandwidth guarantee. Outbound interface Displays the outbound interface of data traffic. Total bandwidth settings Displays the total bandwidth setting of outbound interface.

  • Page 109: Congestion Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-39 Congestion avoidance Table5-26 describes the details of congestion avoidance. Table5-26 Congestion avoidance Item Description Name Displays the policy name of congestion avoidance. The policy of dropping package The policy of dropping package includes RED and WRED.

  • Page 110: Traffic Shaping

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Outbound interface Displays the congestion management outbound interface. Congestion avoidance Readjust congestion avoidance. Total bandwidth settings Configure the total bandwidth settings. Franchise’s PRI Configure the congestion management franchise priority. Low PRI protected Select whether to enable low priority protected.

  • Page 111: Arp Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-42 Anti-ARP-Spoofing Table5-28 describes the details of Anti-ARP-Spoofing. Table5-28 Anti-ARP-Spoofing Item Description Option Select an anti-arp-spoofing entry and then click the option. IP address Displays the IP address scanned by anti-arp-spoofing.

  • Page 112: Figure5-43 Arp Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure5-43 ARP configuration Table5-29 describes the details of ARP configuration. Table5-29 ARP configuration Item Description Interface name Displays the all interfaces name of the device. Enable state Enable/disable ARP configuration interface.

  • Page 113: Chapter 6 Log Management

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Chapter 6 Log Management 6.1 Introduction to Log Management Log management provides log management function, it include  System log  Operation log  Business log Select Basic > Log management from navigation tree to enter the log management menu, as shown in Figure6-1.

  • Page 114: Figure6-2 Latest Log

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure6-2 Latest log Note： To export system log to your local system, click Export button and select the “Open” or “Save” button the system prompt interface. If you select the Open button, you can open system log on your local system. If you select the Save button, you can save system logs to CSV file to your local system.

  • Page 115: System Log Query

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description  Information: unknown information  Unknown: means the unknown information. Log content Content of a log. Note: Auto-refresh function can be set as 10, 30, 60 seconds, after you enable this function, you can click the refresh button to manual refresh the latest log page.

  • Page 116: System Log File Operation

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table6-2 System log searching conditions Item Description Severity Allows you to search system log according to different severity level. Time scope Allows you to search system log as the selected time range.

  • Page 117: System Log Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description Operation Click Backup and delete icon to backup or delete system logs. 6.2.4 System Log Configuration System log configuration provides system log saving and exporting to remote host function.

  • Page 118: Figure6-6 Latest Log

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure6-6 Latest log Click Export button and then the system prompt you that you can open or save the CSV file to your local system. Table6-5 describes the details of the latest log configuration items.

  • Page 119: Operation Log Query

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Note： After you enable the auto-refresh function, you can select the auto-refresh time as 10, 30, 60 seconds. After you enable this function. Click Refresh button to refresh the interface manually.

  • Page 120: Log File Operation

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide 6.3.3 Log File Operation Operation log file operation module allows you to back up or delete system log file of today or another day. Select Basic > Log management > Operation log > Log file operation from navigation to enter into Operation log file operation interface, as shown in Figure6-8.

  • Page 121: Service Log

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure6-9 Operation log configuration Table6-8 describes the details of operation log configuration items. Table6-8 Operation log configuration items Item Description Output to remote syslog server Set remote syslog server parameters, including ...

  • Page 122: Figure6-10 Service Log

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure6-10 Service log Table6-9 describes the configuration items of the service log. Table6-9 Service log configuration items Item Description Days for saving Select the max saving day for system log file and then system will delete the expired system log file.
  • Page 123 DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Item Description mail address User name Set the mail server username Password Set the mail server password Number Configure a number for e-mail sent out per minute e-mails sent out...

  • Page 124: Chapter 7 User Authentication

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Chapter 7 User Authentication 7.1 Portal Authentication 7.2 Introduction to Portal Authentication Portal authentication provides several authentication mechanisms, which allows user to authenticate their user name and password before access to the Internet.

  • Page 125: Figure7-2 Basic Authentication

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure7-2 Basic authentication Table7-1 describes the details of basic authentication configuration items Table7-1 Basic authentication configuration items Item description Web auth Allows you to enable or disable web auth function.

  • Page 126: Figure7-3 Webauth Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure7-3 Webauth configuration Table7-2 describes the configuration items of webauth configuration. Table7-2 Webauth configuration items Item Description NAT traverse configuration Allows you to configure the NAT traverse configuration, including authenticated protocol configuration, authentication policy configuration.

  • Page 127: Figure7-4 Tac Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Figure7-4 TAC configuration Table7-3 describes the configuration items of TAC. Table7-3 TAC configuration items Item Description Management server IP address Configure an IP address for the management server. Client download URL...

  • Page 128: Table7-4 Customer Configuration

    DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide Table7-4 describes the configuration items of the customer configuration. Table7-4 Customer configuration Item Description Login page Select an option that the login page will skip to the specific page ...

Table of Contents