1. Manuals
  2. Brands
  3. Denali Manuals
  4. Snow Blower
  5. VIPER MA11142
  6. Operator's manual

Denali VIPER MA11142 Operator's Manual

Plow system for can am/bombardier outlander 2008-09 400/500/650/800
Hide thumbs
1
2
3

Advertisement

Table of Contents

23001 Industrial Blvd, Rogers, MN 55374 / 1-866-527-7637 / www.motoalliance.com
VIPER PLOW SYSTEM / Can Am/Bombardier Outlander
2008-09 400/500/650/800 MA11142
Thank you for purchasing the premium VIPER PLOW system. You now have a top-of-the-
line plow system to using for shoving aside snow and dirt with the use of your ATV. Please
note the following instructions and heed all warnings.

WARNING!!!

SEVERE INJURY OR DEATH MAY RESULT IF YOU IGNORE ANY OF
THE FOLLOWING.
−Read the Plow Operator's Manual, the Winch Operator's Manual, and all warning labels
before operating.
−Operate ATV at a walking speed with the blade installed. Do Not exceed 5mph (8 km/h)
even with the blade up.
-Plow Cautiously, impact with a hidden or stationary object may cause the ATV to stop
suddenly or go out of control.
--Do Not operate the ATV on slopes greater than 10° with the plow installed.
−Do Not stand or ride on the plow.
Stay clear of moving parts and joints. Keep others away when operating or adjusting plow.
−Inspect the plow mechanism, fasteners, cable, and adjustments before operating. Replace
all worn or damaged parts before operating.
−Lower the plow to the down position before leaving the ATV
unattended.
www.motoalliance.com
1-866-527-7637

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VIPER MA11142 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Denali VIPER MA11142

  • Page 1 23001 Industrial Blvd, Rogers, MN 55374 / 1-866-527-7637 / www.motoalliance.com VIPER PLOW SYSTEM / Can Am/Bombardier Outlander 2008-09 400/500/650/800 MA11142 Thank you for purchasing the premium VIPER PLOW system. You now have a top-of-the- line plow system to using for shoving aside snow and dirt with the use of your ATV. Please note the following instructions and heed all warnings.

  • Page 2: Parts List

    PARTS LIST 1 Plow Mount 1 Plow Mount Strap 4 5/16-18 X 1 1/2 Hex Bolt 4 5/16 Flat Washer 4 5/16-18 Lock Nut 3 3/8-16 X 1 Hex Bolt 3 3/8 Flat Washers 3 3/8-16 Nylock Nuts CAUTION USE EXTREME CAUTION WHEN DRILLING Figure 1 - Remove Bolts THROUGH THE SKIDPLATE.
  • Page 3 3. Place the plow mounting strap into location as shown in figure 3. Secure with two 3/8-16 X 1 hex bolts, 3/8 flat washers and 3/8-16 lock nuts. Tighten all hardware at this time. Figure 3 - Plow Mount Strap Location Plow Installation: 1.

Table of Contents