Sony DAV-SR3 Operating Instructions Manual page 63

By pressing Number
TV/VIDEO 0
1
2
3
4
5
6
7*
8*
* Except for North American models.
Operation
Point the remote to the direction of TV and this
system, then press SONY TV DIRECT once.
While transmitting the code from the remote, the
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
To change the transmit time
Press and hold TV CH + while entering the
code for transmit time (see table below) using
the number buttons.
The transmit time from the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
By pressing Number
TV CH+ 1
2
3
4
5
6
7
8
TV's input source
No input source
(Default)
VIDEO1
VIDEO2
VIDEO3
VIDEO4
VIDEO5
VIDEO6
COMPONENT1
INPUT
COMPONENT2
INPUT
Transmit time
0.5 (Default)
1
1.5
2
2.5
3
3.5
4
Notes
• This function is only for SONY TV series.
• If distance between TV and this system is too far, this
function may not work. Install the system near the
TV.
• Keep the remote pointed in the direction of the TV
and this system while the TV button is flashing.
63 GB