1.0 GENERAL Thank you for your purchase of an Optical Wavelength Labs (OWL) Dual OWL series multimode light source. The source is simple to operate with two buttons: one for controlling power and one for selecting the output port. LED indicators highlight the selected port and verify that battery power is sufficient to maintain the calibrated output power, and wavelength is indicated by 7-segment LED display.
3.2.2 Patch Cords - Patch cords may be needed to connect the Dual OWL series light source to the system under test. The connector styles on the patch cord must match the type on the light source and the type of the system under test.
4.0.2 For accurate readings, the optical connectors on Dual OWL series light sources and the connectors on the patch cords should be cleaned prior to attaching them to each other. Minimize dust and dirt buildup by replacing the dust caps after each use.