Table of Contents
Advertisement
Using the Video or Other
Units
You can use VCRs or other units connected to
the VIDEO or SAT jacks. Refer to the operation
manual supplied with the unit for further
information on the operation.
Press FUNCTION repeatedly until VIDEO or
SAT that you connected the unit to appears
in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
FM t AM t VIDEO t SAT t DVD t
FM...
If you change to SAT mode when you use both
the SAT AUDIO IN (L/R) jacks (analog
connection) and OPTICAL DIGITAL IN jack
(digital connection) at the same time, the
OPTICAL DIGITAL IN jack takes priority.
Enjoying Multiplex
Broadcast Sound
(Dual Mono)
You can enjoy multiplex broadcast sound when
the system receive the AC-3 multiplex broadcast
signal.
Note
To receive the AC-3 signal, you need to connect a
digital satellite tuner to the system with an OPTICAL
FUNCTION
cable (page 25) and set the digital output mode of the
digital satellite tuner to AC-3.
C/X/x/c/
ENTER
1
2
3
4
With cover opened.
Press AMP MENU.
x/X
Press
repeatedly until
"Customize"
appears in the front
panel display, then press ENTER or c.
The system enters the Customize Menu
mode.
x/X
Press
repeatedly until
Mono"
appears in the front panel
display, then press ENTER or c.
x/X
Press
to select the sound you
want.
x Dual Mono Main
Sound of the main language will be output.
AMP MENU
"Dual
continued
81
GB
Hide quick links:
Advertisement
Table of Contents
