Advertisement

GC-1028 Metal Detector
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GC-1028 and is the answer not in the manual?

Questions and answers

Summary of Contents for URCERI GC-1028

  • Page 1 GC-1028 Metal Detector OWNER’S MANUAL...
  • Page 2 With your metal detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. The detector is versatile and easy to use. The detector’s features include: LCD Display—shows the probable type of metal with an arrow, the depth of the target, DISC range, the level of SENS with segment, the operating mode, and battery indication.
  • Page 3: Installing Batteries

    2. Insert the latch on the top of the handle into the assembly hole on the bottom of the control box. Then slightly push the control box in the direction of IN marked on the handle to fix the latch in place. Secure the control box with fixing screw properly.
  • Page 4: Using Headphones

    Cautions:  Use only fresh alkaline batteries of required size.  Do not mix the old and new batteries or different types of batteries.  Dispose of old batteries promptly and properly. Never bury or burn them.  If you don’t plan to use the unit for a week or more time, remove the batteries.
  • Page 5 8" 6" 4" 2" PHONE POWER PHONE DOWN MODE 2. DISPLAYS The LCD displays the detection mode, sensitivity level, battery condition, volume level and the depth of target. When the detector finds an object, an arrow appears below the target icon.
  • Page 6: Operation

    coin. Some large rough gold items or bronze objects might register within this category. SILVER Range 10¢--indicates that the target is probably 10¢ coin. 25¢/$1--indicates that the target is probably silver coin, 25¢ or $1. Some large aluminum coin might register within this category. 50¢---indicates that the target is probably 50¢...
  • Page 7: Setting The Operation Mode

    confirm the setting. 4. SETTING THE OPERATION MODE The detector comes with three operating modes of ALL METAL, DISC, PINPOINT. a.ALL METAL—Used for detecting all types of metal. Press SET twice, then ENTER to get ALL METAL. In this mode, the unit can detect all kinds of metal.
  • Page 8 1. Press POWER to power on the detector. 2. Follow the instructions described in OPERATION to set SENSITIVITY, VOLUME and operation mode. 3. Place the detector on a wooden or plastic table, then remove any watches, rings, or metal jewelry you are wearing. 4.
  • Page 9 area where you place the item, to help you find it later. Do not place it in tall grass or weeds). Hold the search coil level to the ground about 1~2 inches above the surface, slowly move the search coil over the area where you placed the sample, sweeping the search coil in a side-to-side motion.
  • Page 10 The detector responds with a signal when it detects most valuable  metal objects. If a signal does not repeat after you sweep the search coil over the target a few times, the target is probably junk metal. False signals can be caused by trashy ground, electrical interference, ...
  • Page 11: Care And Maintenance

    may be restricted by some factors. The angle of the target buried in the soil.  The depth of the target.  The level of oxidization of the target.  The Size of the target.  Electro-magnetic and electrical interference surrounding the target. ...

Table of Contents

Save PDF