Do you have a question about the 4.0 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Proze 4.0
Page 1
PROZE DASHCAM 4.0 HD Dash Cam with Front and Rear Camera Product Manual Bedienungsanleitung Manual del Producto Manuale del Prodotto Manuel du Produit • WARNING! DO NOT OPERATE CAMERA WHILST DRIVING, ONLY OPERATE WHEN SAFELY PARKED • WARNHINWEIS! KAMERA NICHT BEIM FAHREN BETREIBEN, NUR BEI SICHEREM PARKEN FUNKTIONIEREN •...
Page 2
Precautions Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire CAUTION: To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so.
Page 3
9. Whilst driving, do not adjust the controls of your device as this is a distraction to driving. Included In The Box 1 x Proze Dash Cam 4.0 1 x Rear Camera 1 x Suction Mount 1 x 12V Car Power Cable...
Functions Micro USB port is used to charge the battery when plugged into car with the 12V power line included. It is also used for PC intersect with the correct Mini USB Cable (not included). Power On / Off – PRESS BOTH MODE AND POWER BUTTON TOGETHER. Buttons: •...
Page 5
DO NOT Mount the dash camera in a place where it will obstruct the drivers view when driving. Use the illustration below as a guide for installing your Proze Camera. Do not place in the red...
Page 6
Dash Cam Settings and scroll down to FORMAT. Enter and press OK to format your SD card. This must be done before you use your camera for recording and pictures, otherwise it will not record anything to the SD card until formatted. CAMERA: Proze Dash Cam 4.0: MODE – Recording, Camera, Viewing...
Page 7
Loop Recording - Time Frame (number will show duration of recording selected) Exposure Level Motion Detection (On/Off) Parking Guard (On/Off) SD Card - Inserted correctly and reading Recording Audio - (On/Off) Time Date Power Connected / Battery Recording – Red Numbers when recording Recording Quality –...
Page 8
Cyclic Record: Select the length of time you would like your recording clips to be, this will be the length of the recordings on your memory card. Interval Record: Time between the recordings, if you want to separate the recordings, otherwise when off the recordings will overlap by default.
Page 9
Motion Detection: This will switch the motion detection function on or off for the parking guard. On allows the camera to come on when it detects motion in front of it. Recording: This is the audio recording. On will record the audio INSIDE the car. Date Stamp: This will show a date stamp on the recording when you view it.
Page 10
Gravity Sensing: This adjusts the sensitivity of the G-Sensor, so the higher the setting the more sensitive to movement the parking guard is. Movement will cause the camera to burst record. Parking Guard: Turn the parking Guard ON to enable the parking guard function, G-Sensor and Motion Detection functions will work using battery power.
Page 11
CAMERA MENU: Press Menu button whilst in camera mode to access the camera picture menu. Capture Mode: Select how the Proze camera will capture a picture when you push the OK button. Instant, 2 / 5 / 10 second delay. This will cause a delay between pushing ok and the picture being taken.
Page 12
Continuous Shooting: This allows for continuous shooting of pictures, so the camera will take pictures continuously. Select ON for this function. Quality: Fine, Normal, Economy. This determines the quality of the picture and economy, will be lower quality but a smaller file, Normal as default and Fine for higher quality pictures. Sharpness: This is the sharpness of the image captured, select Strong for a sharper image, Normal is default and Soft for less Sharpness in your images.
Page 13
Colour: This selects the colour group for your pictures, Normal, for colours, black and white for black and white pictures and Sepia, offers a more toned and neutral colour for your pictures. This would be useful for night driving, brightening the darker colours. Default is Normal. ISO: Auto, 100, 200, 400.
Page 14
Quick Review: This allows for you to see the picture that has just been taken, by selecting one of the time frames given the picture will then show on the screen for the selected time, allowing you to quickly review the picture. Date Stamp: Select this to ON, and a date stamp will show on your pictures.
Page 15
Slideshow: Create a slide show of all pictures / footage and select the duration you will see the selected file for before the next is shown in slideshow. SETTINGS MENU: From any of the previous Menus, press the menu button a second time to go to the Main Dash Camera Settings Menu.
Page 16
Auto Power Off: This is the time you would like the camera to stay on before automatically switching off. Select the time and the camera will auto off after that amount of time has passed. Frequency: This is the light source frequency, this will vary depending on location and if you have any static or problems with recording select another frequency.
Page 17
Language: Select Language - English, Italian, German, Spanish, French, Russian, Korean, Chinese (Simplified), Chinese (Original). Date / Time: Set the Date and Time. TV Mode: The recording will be recorded in a TV mode to allow it to be viewed on other devices, PAL is the EU region standard.
Version: This shows the Version of firmware installed in the camera. For updates please check the Proze website for future updates to the firmware. If experiencing difficulties, you can download and install the firmware again to reset your camera. Go to the Proze website and follow the instructions given to download latest firmware. www.proze-electronics.com Specification Proze Dashcam 4.0...
Page 19
Rear Camera To set up and activate the Rear camera, using the cable in the box, plug this into the rear camera and then into the rear camera port on the main front camera. This will give a number of views, by pressing the UP button you can select between displays, Front View, Rear View, Split Screen (50:50) and picture in picture.
Page 20
PLEASE NOTE WE DO RECOMMEND PROFESSIONAL INSTALLATION FOR THE REAR CAMERA AND OUR WARRANTY DOES NOT COVER ANY DAMAGE CAUSED AS A RESULT OF INCORRECT INSTALLATION. Solutions If you encounter any issues, refer here or if further support needed contact your local support team: support@brightbluedm.com Camera doesn’t take photos or record video?
Need help?
Do you have a question about the 4.0 and is the answer not in the manual?
Questions and answers