Page 3
Peter Thomas, Owner & We’ve now used this knowledge to bring you the cor Oliver Thomas, Head of Design integrated amplifier — for analogue purists.
Page 4
Congratulations on your purchase of this pure analogue Class A/B PMC creation, entirely designed and built in the UK. The cor integrated stereo amplifier has the power to drive virtually any passive loudspeaker to impressive output levels — 95W into 8Ω, or 140W into 4Ω — but with refinement, transparency and neutrality.
Cartridges and record players can be adversely affected the amplifier can be transported safely if the need arises in other electronics. by close proximity to high power devices like the cor the future. If you dispose of the packaging, please do so in integrated.
Page 7
XLRs — especially if the cable is longer than 2 metres. NB: The PMC logo on the front of the unit is the touch sensitive on/off button. Avoid bunching signal and mains cables together — this may add unwanted noise to your audio.
This records the purchase of your product and local PMC dealer or distributor. If you are uncertain who this provides you, the customer, with an opportunity to make is, please go to the PMC web site at www.pmc-speakers.
The loudspeaker outputs are provided on two pairs of maintain positive-to-positive and negative-to-negative 4mm binding posts. If you wish to use the cor integrated connections. The terminals are colour-coded to aid in their as a pre amplifier, there is a preamp output on twin RCA identification: positive terminals are red, negative terminals connectors.
Page 11
Pre-amplifier output Allows use of additional Balanced XLR inputs power amplification or processor. IEC Mains power input For premium, low-noise connection. Phono/RCA unbalanced source inputs Loudspeaker connections All inputs are line level & sonically identical. These binding posts accept spade lugs, 4mm plugs or bare wire.
Page 12
FACING FRONT The cor integrated offers a simple, even minimalist front panel, yet offers all the control listeners will ever need. The volume dial and treble, bass and balance faders are motorised using technology from professional studio mixing consoles, which allows them to be controlled via the...
Page 13
Balance fader Allows for adjustment of left/ Tone bypass right balance. White LED is lit This disables the tone when fader is centred, red LED controls regardless of Mono indicates fader is offset. This still Input selectors faders’ position When selected this sums functions when in mono mode.
Page 14
(with a direct line of sight) is five metres, with a 30° viewing angle. Do not move the front-panel controls at the same time as If the cor controls do not respond, even when using the • they are being reset via the remote control; this may put remote control close to the amplifier’s IR sensor, the...
Page 15
UNLESS OTHERWISE SPECIFIED: FINISH: DEBUR AND DO NOT SCALE DRAWING REVISION DIMENSIONS ARE IN MILLIMETERS BREAK SHARP SURFACE FINISH: EDGES TOLERANCES: LINEAR: ANGULAR: NAME SIGNATURE DATE TITLE: DRAWN CHK'D APPV'D Remote Exploded View MATERIAL: DWG NO. WEIGHT: SCALE:1:1 SHEET 1 OF 1...
If you have no sound and the illuminated PMC logo is If the tone controls have no effect flashing, this means the cor has entered one of its two • The mains supply has not been switched off/ disconnected protection modes.
Warning — packaging material can pose danger to the Warning — the side panels of the cor integrated amplifier young and vulnerable. Ensure these items are stored or Warning — only replace fuses with those of identical rating act as heatsinks and may become hot during operation.
SPECIFICATIONS Specification overview Power amplifier Type Rated output power, 230V mains Pure analogue Class A/B integrated amplifier 95W into 8Ohms 140W into 4Ohms Inputs 1 x balanced, 4 x single-ended, direct in Frequency response 20Hz - 20kHz +0/-0.1dB Outputs 4mm binding posts, preamp out 5Hz - 80kHz +0/-1dB Input impedance 23.5kOhms...
Page 19
This document should not be construed as a commitment on the part of The Professional Monitor Company Limited (PMC). The information it contains is subject to change without notice. PMC assumes no responsibility for errors that may appear within this document. cor is a Trademark of The Professional Monitor Company Limited. 2017 PMC. All rights reserved.