Sony CMT-GPX9DAB Operating Instructions Manual page 7

Sony operating instructions micro hi-fi component system cmt-gpx9dab
Table of Contents

Advertisement

Plug type B
Extend the FM lead aerial horizontally
Plug type C
Extend the DAB/FM lead
aerial horizontally
North American models:
Connect using the white side
Other models:
Connect using the brown side
Note
To prevent noise pickup, keep the aerials away from
the speaker cords.
Tip
You can use the same lead aerial for both DAB and FM
connection. Use the white side connector for DAB
connection and the brown side connector for FM
connection.
3 Connect the DAB aerial.
With a DAB external aerial, you can obtain
a higher DAB broadcast sound quality. We
AM loop
aerial
recommend that you use the supplied DAB/
FM lead aerial only temporarily until you
install a DAB external aerial.
Connect the supplied DAB/FM lead aerial
to the DAB terminal on the back of this unit.
AM loop
aerial
Connect a DAB external aerial (not
supplied) to the DAB terminal on the back
of this unit.
75-ohm coaxial
cable with F male
type connector
(not supplied)
Tip
To install the DAB external aerial (not supplied), 75-
ohm coaxial cable with F male type connector (not
supplied) will be needed.
4 Connect the mains lead to mains.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press ?/1.
Extend the DAB/FM lead aerial
(supplied) horizontally
To DAB external aerial (not supplied)
Connect
using the
white side
continued
GB
7

Advertisement

Table of Contents
loading

Table of Contents