Sony 4-147-229-13(1) Operating Instructions Manual page 59

"MAIN UNIT" t "TUNER FM" t
"TUNER AM" t "DMPORT" t
"AUDIO" t ...
To enjoy the same function as the unit,
select "MAIN UNIT."
When "TUNER FM" or "TUNER AM" is
selected on the unit, you can only select the
same band on the S-AIR receiver. When
other than "TUNER FM" or "TUNER AM"
is selected on the unit, you can select any
band for the tuner on the S-AIR receiver.
8
Adjust the volume on the S-AIR
receiver.
Note
• When the sound is other than 2 channel stereo, multi-
channel sound is downmixed to 2 channel.
• The sound of the S-AIR receiver may be cut off by
operation of the unit.
To set "S-AIR MODE" via the
remote
Press S-AIR MODE.
The S-AIR mode appears in the front panel
display. Each time you press S-AIR MODE, the
S-AIR mode changes.
To control the system from the
S-AIR receiver
You can control the system from the S-AIR
receiver by using the following buttons.
Press Operation
N, X, x, Share the same operations on the
./> remote and unit.
S-AIR CH Change the function of the system.
For details, refer to the operating instructions of
the S-AIR receiver.
Enjoying the S-AIR receiver
while the unit is in standby
mode
For the S-AIR receiver
You can enjoy the S-AIR receiver while the unit
is in standby mode by setting "S-AIR STBY" to
"STBY ON."
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "S-AIR
MENU" appears in the front panel
display, then press
3
Press X/x repeatedly until "S-AIR
STBY" appears in the front panel
display, then press
Note
• When the wireless transmitter is not inserted in
the unit, "S-AIR STBY" cannot be selected.
4
Press X/x to select the desired setting.
• "STBY ON": You can enjoy the S-AIR
receiver while the unit is in standby mode
or turned on. The power consumption
during standby mode increases.
• "STBY OFF": You cannot enjoy the
S-AIR receiver while the unit is in
standby mode.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Note
• When you turn the system off while "S-AIR STBY"
is set to "STBY ON," "S-AIR" flashes (when sound
transmission between the unit and S-AIR receiver is
not established), or lights up (when sound
transmission between the unit and S-AIR receiver is
established) in the front panel display.
or c.
or c.
59
US