Aumuller UniPC Assembly And Commissioning Instructions

Assembly and Commissioning Instructions
UniPC (Drive Parameterisation)
UniPC (Drive Parameterisation):
• UniPC is a parameter assigment software A
drives - with the necessary hardware (ParInt). With
this program, a variety of A
confi gured.
• For each product, a separate „plugin" is available.
• Each plugin confi gures and controls other drives.
• Confi gurable drives: S12, S12 V.2, S3
Warranty claims require proper and profes-
sional assembly, installation and maintenance
!
in accordance with national regulations and
manufacturer's instructions of the drives.
The safety instructions in the supplied pro-
duct documentation are to be observed.
UniPC (Drive Parameterisation)
Part.-No.:
Application:
Rated voltage:
Confi gurable drives:
Connections:
Package contents:
Feature / Equipment:
UMÜLLER
productes can be
UMÜLLER
524178
Hard- and software for the confi guration of drives
produced by Aumüller A
24 V DC +/-20 %
24 V DC in version S12, S12 V.2, S3
230 V AC in version S12, S12 V.2
3x Pluggable screw terminals 1,0 mm²
1x USB Port
1x Software UniPC (Download link)
http://www.aumueller-gmbh.de/Downloads
1x Interface "ParInt"
1x USB cable
1x Connection cable
Power supply 24 V DC not included!
Power supply 24 V DC not included!
The power supply 24 V DC of a
N
OTE
control unit or test equipment (Part.-
No.: 533981) can be used!
Strictly observe the information given in this
and in the instructions for installation of
the drives when parameterize the A
!
drives with UniPC.
Details can be found on our website
www.aumueller-gmbh.de
Keep this instruction over the lifetime of the
product.
A G H.
UMÜLLER UMATIC MB
-
UMÜLLER