Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ruijie Networks RG-ANTx3-2400D
Summary of Contents for Ruijie Networks RG-ANTx3-2400D
- Page 1 RG-ANTx3-2400D Antenna Hardware Installation and Reference Guide...
-
Page 2: Copyright Statement
Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks is prohibited. Exemption statement This document is provided “as is”. -
Page 3: Obtaining Technical Assistance
It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it is assumed that the users are already familiar with the related terms and concepts. Obtaining Technical Assistance Ruijie Networks Website: http://www.ruijienetworks.com/ Service Email: service_rj@ruijienetworks.com ... -
Page 4: Product Overview
Product Overview 1 Product Overview The RG-ANTx3-2400D is an outdoor directional antenna that supports 3X3 MIMO and works with the RG-AP630 series products for coverage and bridge applications of the 2.4GHz band. 1.1 RG-ANTx3-2400D Specifications Table 1-1 RG-ANTx3-2400D Technical Specifications... - Page 5 Product Overview Figure 1-3 Standard Waterproofing Material for the RG-ANTx3-2400D...
-
Page 6: Check Before Installation
2.2 Installing the Antenna Please carefully read the precautions before installing the RG-ANTx3-2400D. Do not install the RG-ANTx3-2400D near the conductive positions, such as power supplies or street lamps. Do not touch electric wires that may cause injury or death during the installation. -
Page 7: Installing The Antenna Mounting Bracket
Installation 2.2.1 Installing the Antenna Mounting Bracket Figure 2-1 Fixing the Antenna and Mounting Bracket 2.2.2 Installing the Feeder and Waterproofing Connect the feeder cable to the antenna port. Apply three layers of waterproofing treatment in the connection point: waterproof tape as the first layer, waterproof clay as the second layer, and waterproof tape as the third layer. -
Page 8: Adjusting The Antenna
Connect the other end of the feeder cable to the AP port. Connect the 2.4GHz feeder ports of the RG-ANTx3-2400D to the 2.4G-1, 2.4G-2, 2.4G-3 ports of the AP630 with no sequence. Apply waterproofing materials on the feeder connection point by referring to section Installing the Feeder and Performing Waterproof Treatment. - Page 9 Installation When using external antennas, configure the RG-AP630 to work in the external antenna working mode. For detailed configuration commands, see the RG-WLAN Series Access Point RGOS Configuration Guide.
Need help?
Do you have a question about the RG-ANTx3-2400D and is the answer not in the manual?
Questions and answers