Jarv 10000MAH User Manual page 10

WIRELESS CHARGING OF QI
ENABLED DEVICES:
This Powerbank works with most Qi enabled devices Or
Qi internal devices with built-in wireless receivers
1. Place your Qi-enabled device on the wireless
charging pad. Make sure the center of the device is
aligned over the center of the charging base. Charging
will begin on contact.
2. The LED indicator will turn green to indicate a
wireless device is being charged. If the Green LED light
does not turn on, please make sure your device is
properly aligned to the wireless charging pad.
3. If no charging load is placed on the device, the
Powerbank will turn off automatically after 20 seconds.
DO NOT PUT ANY METAL OR MAGNETS BETWEEN
THE POWER BANK AND CHARGING DEVICE WHILE
CHARGING WIRELESSLY
0/