DMP Electronics TV Trolley Stand Assembly Instructions Manual

Thanks for choosing our stand. This stand was designed for mounting flat panel televisions weighing up to 25 kg. The
height of TV can be easily adjusted. The integrated wheels provide ease of movement.
Safety Warning
: If you do not understand these directions, or have any doubts about the safety of the installation,
please call a qualified contractor. Check carefully to make sure there are no missing or defective parts. Never use defective
parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explic-
itly specified in this manual. We can not be liable for damage or injury caused by incorrect mounting, incorrect assembly,
or incorrect use.
Required Tools: Phillips screw driver.
Supplied Parts
No.
1
2
3
4
5
6
7
Assembly Instructions for TV Trolley Stand
Picture Description
Long Square Tube
Short Square Tube
Tube Connector
Tube Connector Cover
Pole With Shelf Add-on Holes
Pole Without Holes
Pole Connector
1
Quantity
2
2
1
1
1
1
1