Newland ME50N User Manual

ME50N User Manual
LTE Wireless Router
Thanks for choosing ME50N 4G wireless Terminal, please read and
keep the user manual carefully. It is more convenient for you to use our
router.
1、Main Technology Parameters
●Working temps : 0 ℃ -- +50℃
●Relative humidity: 5%--95%
●Working frequency : LTE: Band/4/7/66 WCDMA: Band2/5
●Power supply : input AC :100V~240V，50Hz~60Hz
Output DC: 12V, 1000mA
●Size: 175mm*155mm*75mm
●Weight: 250g
●Rate of uplink and downlink :LTE(Cat 4): DL150Mbps；
UL50Mbps
2、Product Manual
2.1 Product diagram
2.2 Product interface
(1) External ANT interface
(2) WLAN && WPS ON/OFF Switch
(3) SIM Card (4) Reset Button
(5) Phone Port (6) LAN Port
(7) Power Switch (8) DC Power
2.3 Indicator
Type Status Description
not connected
OFF
SIGNAL
Connected the internet, The signal is poor
Yellow
Connected the internet, Signal is good
Green
WIFI unopened
OFF
WIFI is opened and has data transmission
ON
Press WPS key for 4 seconds, then release, the
Flicker
WLAN
WPS lights will be flashing. If device has been
connected, WPS light will be off. If device is
always not connected ,the light will just flashing
2min ,then to go out
Power abnormal, the router power off
OFF
POWER
Power normal, the router power on
ON
3、Quickly Configuration Guide
The router support standard RJ45 cable or WLAN wireless way
to connect computer, Support Windows XP, Windows 7,Windows
8,MAC OS, Linux, Android and so on.
First Step：
(1) Take out the device, insert the SIM card according to the
instructions, and then use the matching power adapter to
supply power to the devices.
(2) Make the computer obtain IP address automatically, once the
computer get IP, input CPE IP address into the browser, press"enter"to
access CPE home page, click "login "in upper right corner to access
login page. You can get CPE default IP address、username and
password from the nameplate attached at back cover.