GENERAL
The Honeywell M6410C/L and M7410C actuators are
specifically designed to provide floating control together with
the V5822/23 and V5832/33 series of small linear valves.
The M6410C/L and M7410C actuators are used in fan-coil-
units, induction units, small reheaters and recoolers and for
zone control applications. They are employed in electronic
temperature control systems using hot and/or cold water as
the controlled medium.
The M6410C/L and M7410C actuators are suitable for
Honeywell Excel series controllers as well as for Honeywell
individual room temperature controllers. These controllers
track the precise valve position by counting the number of
individual control pulses which move the valve from one
position to another. For this reason, the actuators do not need
endswitches or a feedback potentiometer. The absence of
these mechanical components ensures longtime reliability.
The M6410C/L and M7410C actuators are also compatible
with any controller providing intelligent position control and
having a built-in shut-off function.
These actuators are well suited for applications where space
is limited and minimum power consumption is required. The
actuators are both attractive and robust in design.
® U.S. Registered Trademark
Copyright © 2006 Honeywell Inc. • All rights reserved
M6410C/L, M7410C
Small 3-Position Linear Valve Actuators
FEATURES
•
Small size allows installation where space is limited
•
Low power consumption
•
Reliable longtime operation because mechanical
feedback potentiometers and mechanical end
switches are not required
•
Magnetic coupling for stem force limitation and self-
adjustment of the close-off-point
•
Reversible synchronous AC motor
•
Suitable for three-position modulating control without
proportional feedback
•
Supplied with pre-wired connection cable
•
Simple, standardized valve/actuator coupling; no
tools required for mounting
•
Visual valve position indicator furnished with
actuators
•
Manual operation provided by the valve adjustment
cap, extra knob, or with a hexagon key
•
Auxiliary switch
SPECIFICATIONS
Motor
Input voltage
Power consumption
Control mode
Stroke
Running time
Stem force
Protection standard
Insulation class
Connection cables
Ambient operating limits 0...60 °C
Weight
Suitable valves
Manual operation
The controller output stage must be suitable for current
peaks of up to 800 volts.
Auxiliary Switches
Ratings
Switch position
(factory-supplied)
PRODUCT DATA
24 Vac +10%/-30%; 50/60 Hz
230 Vac +10%/-30%; 50/60 Hz
0.7 VA (24-V models)
7.0 VA (230-V models)
floating
6.5 mm
150 s at 50 Hz, 125 s at 60 Hz
depends on version (see table)
IP 43 as per EN60529
II/III, depending on type (as per
EN 60730)
1.5 m
0.4 kg
see table
see table
5...24 V, max. 100 mA
24...230 Vac, max 3 (1) A
S1 (fixed): 17.8 ± 0.2 mm
S2 (adjustable): 11.7 ± 0.2 mm
EN0B-0096GE51 R0206