Advertisement
Quick Links
Advertisement
Summary of Contents for Fiplex TXPA220
- Page 1 English TXPA220 - Amplifier User & Installation Manual...
- Page 2 Document History Description Revision Date Issued Original version Aug 17 , 2018 UM-0918...
- Page 3 Specifications, dimensions and other statements mentioned in this manual are subject to change without notice. This manual or parts of it may not be reproduced without the written permission of Fiplex Communications Inc. Infringements will be prosecuted. All rights reserved.
- Page 4 Extended Global System for Mobile communication ETACS Extended Total Access Communication System ETSI European Telecommunications Standard Institute Fiplex Control Software Global System for Mobile communication Hardware Light Emitting Diode Low Noise Amplifier, uplink and downlink Mobile Station, MS antenna = towards the mobile station...
- Page 5 Part 1 HARDWARE Safety Dangerous Voltage Warning Any personnel involved in installation, operation or service of Fiplex Signal Boosters must understand and obey the following: The power supply unit in Signal Boosters supplied from the mains contains dangerous voltage level, which can cause electric shock.
-
Page 6: Fcc Compliance
FCC Compliance FCC Part 15.19 Warning Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT... - Page 7 Product Description. The TXPA220 is an amplifier designed to amplify the output of the GEMDS TD220 family of radios in the frequency range of 218-219MHz. The maximum output power of this amplifier is 20W (43dBm). The amplifier is equipped with an AGC circuitry to make sure no more than the maximum power will be transmitted.
- Page 8 2.2. Dimensions The amplifier is for 19” rack mount and it uses 3RU of space. Additional dimensions (in mm): UM-0918...
- Page 9 Installation Mounting the TXPA220 Amplifier The Fiplex TXPA220 Amplifier is designed for outdoor usage with a weather proof outdoor NEMA4 cabinet that can be mounted without any kind of shelter from rain, snow or hail. However, to improve reliability, it is recommended to mount the Device on a site with shelter from direct exposure to sun, rain, snow and hailing.
-
Page 10: Connection Step By Step
Commissioning 4.1. Connection step by step Connect the antenna in the Antenna RF Port of the amplifier. N (F) type of connector. Connect the Radio in the Radio RF Port of the amplifier. N (F) type of connector. Once the RF ports of the Amplifier are properly loaded connect the DC power. The amplifier is ready to be used.