1 foil jumping bed + frame pads 180 x 40 x 25 cm 1.3 Number of users Basically the Hobbytramp should be used by one person at the same time. Therefore other persons should not be on the trampoline. 2. Assembly instructions 2.1 Assembly and disassembly...
Page 3
• Start at the short part and plug in the long part. If needed use the rubber hammer. • Repeat the process on the other side. • Insert a leg into the 2 brackets from above until it stops. • Fix the leg with the screws.
Page 4
• Repeat this process for the other 3 legs. • Now turn over the complete connected and bolted frame and place it even with the ground. • Please make sure that the 4 legs stand even. If not please balance the ground. •...
Page 5
It is not necessary to disassemble the Hobbytramp completely. It is possible to screw off only the feet, the top part of the frame can be left installed. The complete disassembly of the Hobbytramp is to be made in reverse order of the assembly.
Fastening set for coverall frame pads consisting of 6 spring clips, 4 steel springs and 1 black belt All spare parts available from Eurotramp upon request! We are pleased to remain at your disposal to answer any questions: Eurotramp Trampoline - Kurt Hack GmbH Zeller Straße 17/1...
Need help?
Do you have a question about the Hobbytramp and is the answer not in the manual?
Questions and answers