Heritor Gemini HR3801 Quick Start Manual

Mechanical automatic watches harness the kinetic energy contained within the natural movement of your arm to generate
the force required to operate. The watch will commence operation after a sufficient volume of initial power has been
generated by handling / wearing or by manually winding the crown. Supplemental winding through wear or manual winding
will ensure sustained functionality and increase the duration in which the watch will continue to operate when unworn.
Setting Instructions
1) Pull the crown to its most outward position.
2) Rotate the crown clockwise until the current time is displayed.
3) Push the crown in to its rest / manual winding position.
4) Manually wind the movement by rotating the crown clockwise 10-20 times.
Note: Although manual winding is not necessary, generating an initial power reserve and occasionally
winding the movement manually will increase the duration in which the movement continues to
operate when the watch is not worn.
Water Resistance Guidelines
Note: Manipulation of the crown while in contact with water will negate the rated water resistance as
water penetration may occur.
The Heritor Gemini Timepiece
(HR3801 – HR3806)
Rating Submersible
No Marking No
5ATM No
10ATM Yes
20ATM Yes
25ATM+ Yes
Capacity of Resistance
Splash/light contact only.
Hand/dish washing.
Low depth and short duration only.
Short duration diving up to 5 meters.
Average depth and duration diving.
© Heritor