Setting And Using Method; Installation Method; Led State - LG PVFDDN000 Installation And Owner's Manual

SETTING AND USING METHOD

4
Status LEDs
Reset SW
Short Key
Outdoor Main
PCB Connector
On-boarding connector
For updating program.
Short key
For updating program.
Reset S/W
For rebooting FDD Module.
Outdoor Main PCB Connector
For Connecting Main PCB and FDD Module.
Status LEDs
Display current status and error.
SETTING AND USING
METHOD

Installation Method

① Join the case in the Multi-V Control Box,
anchor the case at holes using anchor
screws.
Mounting position
of the Option Module
② Connect connection
wire to outdoor Main
PCB.
Power LED
RX LED
TX LED
On-boarding
Connector
! CAUTION
• Install the product on flat surface and
screw 4 places.
Otherwise the FDD Module may not
be anchored properly
• Do not screw too tightly. It may cause
deformation of the case.
• Do not deform the case at random.
It may cause malfunction of the FDD
Module.

LED State

Check out the normal operation of the LED
after outdoor unit power.
[Normal Operation]
- Power LED(Red)
Normal state : Light turns on.
- RX LED : Blinking when transmit outdoor
unit information.
Not blinking when it is not transmit-
ting information.
- TX LED : Blinking when receive outdoor unit
information.
Error state : TX LED always turns
on.(Not blinking)
[Front view of FDD Module]
Power LED
RX LED
TX LED