Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NORTH HYDRO and is the answer not in the manual?

Questions and answers

Summary of Contents for Tim Sistem NORTH HYDRO

  • Page 1: Table Of Contents

    TABLE OF CONTENS Warning before use Description of the cooker Technical data Installing the cooker Disadvantages of the chimney Ignition and lighting Handling the cooker operation Authomatic regulation of stove’s operation Installing the cooker into the sistem for water heating Installation on closed central heating system Installation on opened central heating system Cleaning and maintenance...
  • Page 2 Dear Customer, We appreciate your trust wested in us and decision to use TIM SISTEM product. You have invested in energy-efficient and high-quality product - NORTH HYDRO wood burning cooker. Your purchase will provide you long-term clean and comfortable heating with minimal maintenance.
  • Page 3: Warning Before Use

    WARNING BEFORE USE To keep your cooker working properly, it is important to read this manual and strictly stick to the instructions for use and handling. For combustion use solid fuels such as wood and wood briquettes. It is forbidden putting explosive devices and materials combustion chamber or the limited thermal furnace.
  • Page 4: Description Of The Cooker

    DESCRIPTION OF THE COOKER DESCRIPTION OF THE COOKER Storey stove NORTH HYDRO HYDRO it’s manufactured and tested according to European standard manufactured and tested according to European standard EN 12815. On the figure 1 is shown the appearance of the stove with all it's components EN 12815.
  • Page 5: Technical Data

    TECHNICAL DATA Fuel Wood, wood briquet Nominal power Efficiency Thermal power delivered to water Thermal power delivered to room Dimensions of the cooker WxLxH 900 x 600 x 850 Dimensions of the fire place WxLxH 290 x 450 x 270 Dimensions of the oven WxLxH 350 x 740 x 295 Weight...
  • Page 6: Installing The Cooker

    Figure 2: Termal fuse Caleffi INSTALLING THE COOKER Cooker must not be set up near the wooden parts, refrigeration parts, plastic furniture and other flammable materials because during operation (during fuel combustion) it achieves high operating temperature that is distributed on the outside of the furnace. Minimum distance between the stove and the surrounding elements is 50 cm, and the from flamable materials 80 cm.
  • Page 7: Disadvantages Of The Chimney

    candle flame, as shown in Figure 3 . Put a candle near the chimney connection drain. If the flame bends towards drain, the draft is satisfying (Figure 3b). If the flame doesn’t bend or bends a little, that indicates poor draft(Figure 3a). If there is poor draft in the chimney (Figure 3a), check the chimney operation.
  • Page 8: Ignition And Lighting

    Figure 4 IGNITION AND LIGHTING IGNITION AND LIGHTING Before the first firing, wipe all painted surfaces Before the first firing, wipe all painted surfaces with a clean and dry cloth, in order to avoid with a clean and dry cloth, in order to avoid burning of impurities on the stove and creation of unpleasant smells.
  • Page 9 If fuel briquettes are used as a fuel, you must wait until entire amount of a fuel lightens up and only then reduce draft on half • when adding fuel,open the firebox door for just few degrees, wait for 4-5 seconds and then slowly open them wide. Do not open the door suddenly, because when there is a high flame in the firebox, it can could easily reach in to room Regulating the draft in the cooker, you can regulate temperature, power and the combustion...
  • Page 10: Handling The Cooker Operation

    HANDLING THE COOKER OPERATION Start a fire with a moderate flame in order to avoid thermal shocks. The following amounts of wood are inserted only after the previous volume burn. Do not allow that ashes and unburned accumulate on the grid and to ta pit that way. Clean the grid.
  • Page 11: Authomatic Regulation Of Stove's Operation

    Authomatic regulation of Authomatic regulation of stove’s operation Combustion rate, and thus the amount of heat generated by stove, depends on the amount Combustion rate, and thus the amount of heat generated by stove, depends on the amount Combustion rate, and thus the amount of heat generated by stove, depends on the amount of primary combustion air delivered to the space below the roast grid.
  • Page 12: Installing The Cooker Into The Sistem For Water Heating

    INSTALLING THE COOKER INTO THE SISTEM FOR WATER HEATING - For water supply and drainage in condominial (central) heating system are provided connections to the boiler 1 ". - Cooker can be installed on an indoor or outdoor central heating system. Installation on closed central heating system One of the aspects of mounting installations is depicted on figure 7a.and 7b.
  • Page 13 BOILER Figure Figure 7 a – Scheme of closed central heating system central heating system with built in 4-way valve BOILER Figure Figure 7 b – Scheme of closed central heating system Scheme of closed central heating system with built leaning pipe thermostat Pump Pump 1.
  • Page 14: Installation On Opened Central Heating System

    Installation on opened central heating system One of the possible installation processes is shown in Figure 8. With this system, on the initial line are being set safety distribution line of the expansion vessel and boiler's valve, and on the initial line of the system are being set boiler's valve, a pump and a valv.
  • Page 15 BOILER Figure 8 a Figure 8 a – Scheme of closed central heating system Scheme of closed central heating system with built in 4-way valve BOILER Figure Figure 8 b – Scheme of closed central heating system Scheme of closed central heating system with built leaning pipe thermostat Pump Pump...
  • Page 16: Cleaning And Maintenance

    CLEANING AND MAINTENANCE Regular and proper cleaning allows proper operation and long life of the stove. All cleaning the interior or exterior surfaces are always performed in a cold oven. Cleaning exterior surfaces - is done with a soft cloth that will not damage the surface of the stove.
  • Page 17: General Recommandation

    Malfunction Possible cause Howe to remove it Read carefully and follow the instructions. improper handling, Oven heats poorly Inthe case that despite all Poor uptake instructionshave been respected, malfunctions are still not removed, call the customer service Open the regulator of air supplyand Closed regulator of air supply, provide a supply of a primary air Difficulties in lighting fire...
  • Page 18: Advices For Environment Protection

    The warranty is valid from the date of purchase, as evidenced by duly completed guarantee certificate, and the shop’s receipt. The warranty for this product is 24 months. TIM SISTEM is obliged to provide spare parts in due time after the stove is no longer pro- duced.
  • Page 19 This warranty does not cover damage caused by:  inadequate use of stoves;  violating the instructions given in this manual;  mechanical damage incurred due to inadequate storage and transport;  due to mechanical damage caused by kicking, tumbling; ...

Table of Contents