Wearing The Headset - Sony DR-BT30Q Operating Instructions Manual

Wearing the headset

1
Pull out the cord.
End mark
Note
Do not pull out the cord forcibly
beyond the end mark.
2
Hook the upper section
around the top of your
left ear and ensure that
it is seated snugly
around the back of your
ear.
Wear the housing marked R in
your right ear and the one
marked L in your left ear.
Retracting the cord
Remove the housings from your
ears, hold the cord, and press the
AUTO WIND button to retract the
cord as shown by the arrow in the
illustration closing the headset upper
sections.
AUTO WIND button
Note
If the cord is stopped midway, pull out the
cord about 50 cm (1.6 ft) and press the
AUTO WIND button again.
11