Advertisement
Component Task
GQRP / Kanga Regen construction manual V1.11
Part 2. Power Supply
(H2) Fit 22Ω
(Coloured
Red, Red, Black, Gold
(G1) Fit 7808 Voltage regulator. Centre pin bent back.
Check Orientation. Solder in place
(E1) Fit Capacitor. Marked 10uF. Solder in place
(See Notes to the builder) Check Orientation
(H1) Fit Capacitor. Marked 100uF. Solder in place
(See Notes to the builder) Check Orientation
(H1) Fit 100nF Capacitor. Marked 104. Solder in place.
(F1) Fit 10nF Capacitor. Marked 103. Solder in place.
(B1) Fit 10nF Capacitor. Marked 103. Solder in place.
(A0) Antenna Socket
(See Notes to the builder)
(B4) Coil
Construction
). Solder in place
Complete
q
q
q
q
q
q
q
q
q
Page 4 of 12
Advertisement
