Advertisement
2
Assembly
The accessories : Patio Cleaner & Foam Scrub Brush are compatible with SHW196 / 9885 210cc
4 Stroke Petrol High Pressure Washer or with other Petrol Pressure Washers fitted with a
universal ¼" quick fit coupler and maximum input water pressure of 2650 PSI.
The Patio cleaner fits to the gun lance, and the Foam Scrub Brush is fitted to the spray gun.
NOTE:
Before starting the engine of the high pressure washer, first point the gun without
accessory to a safe place and spray some water for about 5 seconds in order to squeeze out the
air inside.
To install the Foam Scrub Brush (See Fig. A1-A3)
1) Insert the adaptor into the Foam Scrub Brush end and tightly screw in.
2) Insert the Foam Scrub Brush with the adaptor into the spray gun as shown in A2. Rotate the
collar located at the end of the gun, until the gun and the brush are connected tightly.
A1
2
To install the Patio Cleaner (See Fig. B1, B2)
1) Retract the collar at the end of the gun lance, insert the gun lance into the connector of
the Patio Cleaner.
2) Release the collar to lock the accessory.
B1
2
1
AFTER SALES SUPPORT
1300 889 028 (toll free)
A2
1
B2
A3
2
1
e-mail:
MODEL No.:
PLU: 9899
info.aldi@positecgroup.com
LB-FP01 • 06/2019
Advertisement
