Disassembly; Cabinets - Sony FDL-PT222 Service Manual

2-1. CABINETS

8
1. Remove the battery cover .
2. Push two claws with a screwdriver or equivalent on the bottom and
remove them.
claw
3. While pushing the rear cabinet, remove claws of joints with
the front cabinet.
4. Insert a screwdriver or equivalent to the gap on the upper side of the
cabinet, and while pushing the lock spring, put it down to the rear cabinet
side.
5. Remove the channel button 2.
6. Disconnect CN501 (for speaker) on the A board.
7. Remove the B board 3 and the A board 4.
8. Remove solder for the lead wire (BLK) 9.
9. Remove a screw (+PTP2X6) 6 secured the T board 5.
10. Release the T1 board 5 from two claws (right and left) on the rear cabinet.
rear cabinet
SECTION 2

DISASSEMBLY

front cabinet
lock spring
– 5 –
2 channel button
6 screw (+PTP2X6)
9 lead wire (BLK)
FDL-PT222
1 front cabinet
3 B board
4 A board
5 T1 board
claw
7 rear cabinet
8 battery cover